Instruction Manual

0458-814-8321-A
25
English 13 Transporting
12.2 Protecting the pressure washer with antifreeze
If the pressure washer cannot be protected from frost during
transport or storage, the pressure washer should be
protected by a glycol-based antifreeze. The antifreeze
prevents water inside the pressure washer from freezing and
causing damage to the pressure washer.
► Remove spray lance
► Connect the shortest possible water hose to the pressure
washer.
The shorter the water hose, the less antifreeze is needed.
► Mix the antifreeze as described in the antifreeze
Instruction Manual.
► Pour antifreeze into a clean container.
► Insert water hose into container of antifreeze.
► Squeeze and hold spray gun trigger.
► Switch on pressure washer.
► Hold down spray gun trigger until an even jet of antifreeze
is delivered from the spray gun and point the spray gun
into the container.
► Press and release spray gun trigger several times.
► Switch off pressure washer and unplug mains plug from
the socket.
► Detach spray gun, high-pressure hose and water hose
and allow antifreeze to run into the container.
► Store and dispose of antifreeze in accordance with the
applicable regulations and in an environmentally
responsible manner.
13.1 Transporting the pressure washer
► Switch off the pressure washer and pull the mains plug out
of the socket.
► Empty the detergent container or secure it so that it cannot
topple over, fall down and cannot move.
► If pulling the pressure washer: Pull pressure washer using
handle (1).
► If carrying the pressure washer: Carry the pressure
washer by the handle (1) and the carrying handle (2).
► If transporting the pressure washer in a vehicle, ensure
that the following conditions are fulfilled:
– The pressure washer is standing upright or is lying on its
back.
– The pressure washer is secured using lashing straps,
cargo ties or a net, and cannot topple over and move.
– If the pressure washer cannot be transported in a frost-
proof environment: Protect pressure washer using
antifreeze.
14.1 Storing the pressure washer
► Switch off pressure washer and unplug mains plug from
the socket.
► The pressure washer should be stored in such a way that
the following conditions are fulfilled:
– The pressure washer is out of the reach of children.
– The pressure washer is clean and dry.
– The pressure washer is in an enclosed room.
– The pressure washer is in a temperature range above
0°C.
13 Transporting
14 Storing
1
2
1
0000-GXX-1813-A0