Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 4.1 Warning Symbols
- 4.2 Intended use
- 4.3 Requirements concerning the user
- 4.4 Clothing and equipment
- 4.5 Work area and surroundings
- 4.6 Safe condition
- 4.7 Operation
- 4.8 Detergents
- 4.9 Connecting the water supply
- 4.10 Connecting to the power supply
- 4.11 Transport
- 4.12 Storage
- 4.13 Cleaning, servicing and repairs
- 5 Safety instructions - Accessories
- 6 Preparing the pressure washer for operation
- 7 Assembling the pressure washer
- 8 Connecting to a water source
- 9 Connecting the pressure washer to the power supply
- 10 Switching the pressure washer on and off
- 11 Operating the pressure washer
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Spare Parts and Accessories
- 21 Disposal
- 22 EC Declaration of Conformity
0458-814-8321-A
22
English
11 Operating the pressure washer
11.1 Holding and controlling the spray gun
► Hold the spray gun by the handle with one hand, wrapping
your thumb around the handle.
► Hold the spray lance firmly with your other hand, wrapping
your thumb around the spray lance.
► Point the nozzle at the ground.
11.2 Squeezing and locking the spray gun trigger
Pressing the spray gun trigger
► Slide retaining latch (1) to the position.
► Press and hold the trigger (2).
The high-pressure pump starts up automatically and water
flows out of the nozzle.
Locking the spray gun trigger
► Release trigger (2).
The high-pressure pump switches off automatically and
water stops flowing out of the nozzle. The pressure
washer is still switched on.
► Slide retaining latch (1) to the position.
11 Operating the pressure washer
0000-GXX-4359-A0
0000-GXX-4360-A0
1
2
0000-GXX-4612-A0
1
2