Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 4.1 Warning Symbols
- 4.2 Intended use
- 4.3 Requirements concerning the user
- 4.4 Clothing and equipment
- 4.5 Work area and surroundings
- 4.6 Safe condition
- 4.7 Operation
- 4.8 Detergents
- 4.9 Connecting the water supply
- 4.10 Connecting to the power supply
- 4.11 Transport
- 4.12 Storage
- 4.13 Cleaning, servicing and repairs
- 5 Safety instructions - Accessories
- 6 Preparing the pressure washer for operation
- 7 Assembling the pressure washer
- 8 Connecting to a water source
- 9 Connecting the pressure washer to the power supply
- 10 Switching the pressure washer on and off
- 11 Operating the pressure washer
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Spare Parts and Accessories
- 21 Disposal
- 22 EC Declaration of Conformity
0458-814-8321-A
17
English
7 Assembling the pressure washer
7.2.2 Removing high-pressure hose
► Unscrew union nut (1).
► Pull out high-pressure hose.
7.3 Attaching and removing the spray gun
7.3.1 Attaching the spray gun
► Slide the socket (1) into the spray gun (2).
The socket (1) audibly engages.
► If the socket (1) cannot be easily pushed into the spray
gun (2): Grease the seal on the socket (1) with grease for
fittings.
7.3.2 Removing the spray gun
► Press and hold the locking lever (1).
► Pull out the socket (2).
7.4 Attaching and removing the spray lance
7.4.1 Attaching the spray lance
► Push spray lance (1) into spray gun (2).
► Twist the spray lance (1) until it engages.
► If the spray lance (1) cannot be pushed easily into the
spray gun (2): Grease the gasket on the spray lance (1)
with grease for fittings.
0000-GXX-6399-A0
1
2
0000-GXX-4348-A0
1
2
1
0000-GXX-4349-A0
0000-GXX-4350-A0
1
2