Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 4.1 Warning Symbols
- 4.2 Intended use
- 4.3 Requirements concerning the user
- 4.4 Clothing and equipment
- 4.5 Work area and surroundings
- 4.6 Safe condition
- 4.7 Operation
- 4.8 Detergents
- 4.9 Connecting the water supply
- 4.10 Connecting to the power supply
- 4.11 Transport
- 4.12 Storage
- 4.13 Cleaning, servicing and repairs
- 5 Safety instructions - Accessories
- 6 Preparing the pressure washer for operation
- 7 Assembling the pressure washer
- 8 Connecting to a water source
- 9 Connecting the pressure washer to the power supply
- 10 Switching the pressure washer on and off
- 11 Operating the pressure washer
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Spare Parts and Accessories
- 21 Disposal
- 22 EC Declaration of Conformity
0458-814-8321-A
16
English
7 Assembling the pressure washer
Installing the holder
► Engage the hooks (1) of the holder (2) in the guides (3).
► Fold the holder (2) to the left.
► Insert screw (4) and tighten.
Inserting nozzles
► Insert fan-jet nozzle (1) and rotary nozzle (2).
Attaching spraying set
► Insert spraying set (1).
7.2 Fitting and removing the high-pressure hose
7.2.1 Connecting the high-pressure hose
► Push the coupling (1) into the connector (2).
► Screw union nut (3) onto the connector (2).
► If it is difficult to slide the coupling (1) into the connector:
Grease coupling (1) with grease for fittings.
► If it is difficult to turn the union nut (3) on the connector:
Grease union nut (3) with grease for fittings.
0000-GXX-5545-A0
2
1
3
4
2
0000-GXX-6395-A0
2
1
0000-GXX-6396-A0
1
0000-GXX-6398-A0
1
3
2