Instruction Manual

0458-814-8621-A
25
English 12 During Operation
► Set the switch to the 0 position.
12.1 Activating and Locking the Spray Gun Trigger
The pressure washer is designed for two-handed operation.
Activating the spray gun trigger
To pull the spray gun trigger:
► Slide the retaining latch (1) to the position.
► Press and hold the spray gun trigger (2).
The high-pressure pump starts up automatically and water
flows out of the nozzle.
Locking the spray gun trigger
To lock the spray gun trigger:
► Release the spray gun trigger (2).
The high-pressure pump switches off automatically when
you release the spray gun trigger. Water stops flowing out
of the nozzle but the pressure washer remains switched
on.
► Slide the retaining latch (1) to the position to lock the
spray gun trigger.
12.2 Adding Detergents
WARNING
Use of unsuitable detergents or cleaning agents can
damage the pressure washer or surface being cleaned and
may result in personal injury. Always read and follow the
detergent manufacturer's warnings and instructions
regarding proper preparation, dilution, safe use and
disposal.
Detergents can improve cleaning effectiveness.
12 During Operation
0000-GXX-4360-A0
1
2
0000-GXX-4612-A0
1
2