Instruction Manual

► Clean the pressure washer.
1
2
0000-GXX-9839-A0
► Swivel lower holder (1) upwards
► Coil the connecting cord (2) on the holder (1).
► Secure the connecting cord (2) using the clip
on the support (1).
3
0000-GXX-9853-A0
► Empty detergent container (3) and insert it into
the pressure washer.
5
4
0000-GXX-9840-A0
► Insert fan-jet nozzle (4) or rotary nozzle (5).
6
0000-GXX-9841-A0
► Wind up the high-pressure hose (6) evenly
distributed.
7
7
7
7
7
7
0000-GXX-9842-A0
► Store the spray attachment in the holders (7)
on the pressure washer.
12.2 Protecting the pressure washer
with antifreeze
If the pressure washer cannot be protected from
frost during transport or storage, the pressure
washer should be protected by a glycol-based
antifreeze. The antifreeze prevents water inside
the pressure washer from freezing and causing
damage to the pressure washer.
► Remove spray lance
► Connect the shortest possible water hose to
the pressure washer.
The shorter the water hose, the less antifreeze
is needed.
► Mix the antifreeze as described in the anti‐
freeze Instruction Manual.
► Pour antifreeze into a clean container.
► Insert water hose into container of antifreeze.
► Squeeze and hold spray gun trigger.
► Switch on pressure washer.
► Hold down spray gun trigger until an even jet
of antifreeze is delivered from the spray gun
and point the spray gun into the container.
► Press and release spray gun trigger several
times.
► Switch off pressure washer and unplug mains
plug from the socket.
► Detach spray gun and water hose and allow
antifreeze to run into the container.
► Store and dispose of antifreeze in accordance
with the applicable regulations and in an envi‐
ronmentally responsible manner.
13 Transporting
13.1 Transporting the pressure
washer
► Switch off the pressure washer and pull the
mains plug out of the socket.
► Empty or secure the detergent container so
that it cannot topple over, fall down and cannot
move.
13 Transporting English
0458-663-0121-B 19