Instruction Manual

0000-GXX-9848-A0
The fan jet nozzle can be adjusted.
If the flat jet nozzle is turned in the + direction,
the working pressure increases.
If the flat jet nozzle is turned in the – direction,
the working pressure decreases.
► Before cleaning, point the water jet at an
inconspicuous spot on the surface and check
that the surface is not damaged.
► Select the distance between the nozzle and
the surface to be cleaned so that the surface
to be cleaned is not damaged.
► Adjust the flat spray nozzle so that the surface
to be cleaned is not damaged.
0000-GXX-5094-A0
► Move the spraying equipment evenly along the
surface to be cleaned.
► Move forward slowly, in a controlled manner.
11.6 Working with detergent
11.6.1 Suction of detergent
Detergents can increase the cleaning effect of
the water.
STIHL recommends the use of genuine STIHL
detergents.
1
2
0000-GXX-9837-A1
► Grasp the recessed grip (1) of the detergent
container and remove it.
► Unscrew cover (2).
► Dose and use detergent as described in the
Instruction Manual of the surface cleaner.
► Turn the cover onto the detergent container
and tighten it firmly by hand.
► Grasp the recessed grip of the detergent con‐
tainer and insert it into the pressure washer.
11.6.2 Suction of detergent from separate
detergent container
The cover ot the detergent container has a
standard thread and fits all standard detergent
containers. A separate detergent container may
be used.
0000-GXX-9838-A0
► Remove detergent container.
► Unscrew cover of detergent container
► Screw the cap with intake hose onto a sepa‐
rate detergent container
11.6.3 Working with detergent
21
0000-GXX-9843-A0
► Turn rotary handle in direction + up to the
stop.
► Turn fan jet nozzle (2) in direction - up to the
stop.
3
0000-GXX-9170-A0
11 Operating the pressure washer English
0458-663-0121-B 17