Instruction Manual

11.2 Unrolling the high-pressure
hose
1
0000-GXX-9835-A1
WARNING
■ When the lever of the spray gun is released, a
recoil occurs in the high-pressure hose. A
recoil expands the high-pressure hose. If the
high-pressure hose is not completely unwound
from the hose reel, there is no room for the
high-pressure hose to expand and the high-
pressure hose may be damaged. Water can
escape uncontrollably into the environment at
high pressure. This may result in serious injury
to people and damage to property.
► Completely unroll high-pressure hose.
► Completely unroll high-pressure hose (1).
11.3 Setting the working pressure
and the water flow rate
1
2
0000-GXX-9836-A0
Increase working pressure and water flow rate
► Turn rotary control (1) towards +.
Decrease working pressure and water flow rate
► Turn rotary control (1) towards –.
The pressure in the high-pressure pump is indi‐
cated by the pressure gauge (2).
11.4 Pressing and locking the spray
gun lever
Press spray gun lever
0000-GXX-4360-A0
1
2
►
Move retaining latch (1) to the
position.
► Press and hold lever (2).
The high pressure pump switches on automat‐
ically and water flows out of the nozzle.
Lock spray gun lever
0000-GXX-4612-A0
1
2
► Release lever (2)
The high pressure pump switches off automat‐
ically and water no longer flows out of the noz‐
zle. The pressure washer is still switched on.
►
Move retaining latch (1) to the
position.
11.5 Cleaning
The following nozzles can be used depending on
the application:
–
Fan-jet nozzle: The fan jet nozzle is suitable
for cleaning large surfaces.
–
Rotary nozzle: The rotary nozzle is suitable for
removing stubborn dirt.
Work can be carried out at a small distance if
stubborn dirt is to be removed.
Work can be carried out at a great distance if the
following surfaces are to be cleaned:
–
Varnished surfaces
–
Surfaces made of wood
–
Rubber surfaces
English 11 Operating the pressure washer
16 0458-663-0121-B