Instruction Manual

7.2 Pulling out and pushing in the
handle
7.2.1 Removing handle
2
1
0000-GXX-9167-A0
► Press trigger switch lockout (1) and pull out
handle (2).
► Release trigger switch lockout (1) and pull out
handle (2) until it audibly engages.
7.2.2 Inserting handle
1
2
0000-GXX-9168-A0
► Press trigger switch lockout (1) and insert han‐
dle (2).
► Release trigger switch lockout (1) and insert
handle (2) until it audibly engages.
7.3 Attaching and removing the
spray gun
7.3.1 Attaching the spray gun
0000-GXX-5095-A0
1
2
► Push connector (1) into spray gun (2).
The connector (1) audibly engages.
► If the connector cannot be pushed easily into
the spray gun (2): Grease the gasket on the
connector (1) with grease for fittings.
7.3.2 Removing the spray gun
0000-GXX-5096-A0
1
2
► Press and hold the locking lever (1).
► Pull out connector (2).
7.4 Attaching and removing the
spray lance
7.4.1 Attaching the spray lance
0000-GXX-4350-A0
1
2
► Push spray lance (1) into spray gun (2).
► Twist the spray lance (1) until it engages.
► If the spray lance (1) cannot be pushed easily
into the spray gun (2): Grease the gasket on
the spray lance (1) with grease for fittings.
7.4.2 Removing the spray lance
0000-GXX-4351-A0
2
1
► Squeeze spray lance (1) and spray gun (2)
together and twist as far as they will go.
► Pull spray lance (1) and spray gun (2) apart.
English 7 Assembling the pressure washer
12 0458-663-0121-B