Instruction Manual

0458-616-0121-A
4
English 3 Overview
1 Handle
The handle is used to carryand move the pressure
washer.
2 Holder
The holder is used to store the spray gun.
3 Holder
The holder is used to store the spray attachment.
4 Carrying handle
The carrying handle is used to carry the pressure
washer.
5 Socket
The socket is used to connect the water hose.
6 Socket
The socket is used to connect the high-pressure hose.
7 Toggle switch
The toggle switch is used to switch the pressure washer
on and off.
8 Holder
The holder is used to store the connecting cord.
9 Connecting cord
The connecting cord connects the pressure washer to
the mains plug.
10 Clip
The clip holds the mains plug in place on the wound on
connecting cord.
11 Mains plug
The mains plug connects the connecting cord to a
socket.
12 Compartments
The compartments are used to store the nozzles that are
supplied.
13 Holder
The holder is used to store the spray set.
14 Holder
The holder is used to store the high-pressure hose.
15 Cleaning pin
The cleaning pin is used to clean the nozzle.
# Rating plate with serial number
3.2 Spray attachment
1 Latch
The latch holds the nozzle in the spray lance.
2 Spray lance
The spray lance connects the spray gun with the nozzle.
3 Spray gun
The spray gun is used to hold and guide the spray
attachment.
4 Retaining latch
The retaining latch unlocks the trigger.
5 Trigger
The trigger opens and closes the valve in the spray gun.
The trigger starts and stops the water jet.
6 Locking lever
The locking lever holds the connector in the spray gun.
7 High-pressure hose
The high-pressure hose transports the water from the
high-pressure pump to the spray gun.
6
1 3 4
5
2
10
7
8
13
0000-GXX-5291-A0
9
14
15
12
11