Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 4.1 Warning symbols
- 4.2 Intended use
- 4.3 Requirements concerning the user
- 4.4 Clothing and equipment
- 4.5 Work area and surroundings
- 4.6 Safe condition
- 4.7 Operation
- 4.8 Detergents
- 4.9 Connecting the water supply
- 4.10 Connecting to the power supply
- 4.11 Transport
- 4.12 Storage
- 4.13 Cleaning, servicing and repairs
- 5 Safety instructions - Accessories
- 6 Preparing the pressure washer for operation
- 7 Assembling the pressure washer
- 8 Connecting to a water source
- 9 Connecting the pressure washer to the power supply
- 10 Switching the pressure washer on and off
- 11 Operating the pressure washer
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Spare Parts and Accessories
- 21 Disposal
- 22 EC Declaration of Conformity
0458-616-0121-A
25
English
14 Storing
► If the pressure washer is being pulled: Pull the pressure
washer by the handle (1).
► If the pressure washer is being carried: Carry the pressure
washer by the handle (1) and carrying handle (2).
► If the pressure washer is being transported in a vehicle,
ensure that the following conditions are fulfilled:
– The pressure washer is upright or is lying on its back.
– The pressure washer is secured using lashing straps,
belts or a net and cannot topple over or move.
– If the pressure washer cannot be transported in a frost-
proof way: Protect the pressure washer with an
antifreeze agent.
14.1 Storing the pressure washer
► Switch off pressure washer and unplug mains plug from
the socket.
► The pressure washer should be stored in such a way that
the following conditions are fulfilled:
– The pressure washer is out of the reach of children.
– The pressure washer is clean and dry.
– The pressure washer is in an enclosed room.
– The pressure washer is in a temperature range above
0°C.
– If the pressure washer cannot be protected from frost in
storage: Protect the pressure washer with antifreeze.
15.1 Cleaning the pressure washer and accessories
► Switch off pressure washer and unplug mains plug from
the socket.
► Clean the pressure washer, high-pressure hose, spray
gun and accessories with a damp cloth.
► Clean the connectors and couplings on the pressure
washer, high-pressure hose and spray gun with a damp
cloth.
15.2 Cleaning the nozzle and spray lance
► Flush nozzle and spray lance under running water and dry
with a cloth.
14 Storing
1
1
2
0000-GXX-5309-A0
15 Cleaning
0000-GXX-4369-A0