Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 4.1 Warning symbols
- 4.2 Intended use
- 4.3 Requirements concerning the user
- 4.4 Clothing and equipment
- 4.5 Work area and surroundings
- 4.6 Safe condition
- 4.7 Operation
- 4.8 Detergents
- 4.9 Connecting the water supply
- 4.10 Connecting to the power supply
- 4.11 Transport
- 4.12 Storage
- 4.13 Cleaning, servicing and repairs
- 5 Safety instructions - Accessories
- 6 Preparing the pressure washer for operation
- 7 Assembling the pressure washer
- 8 Connecting to a water source
- 9 Connecting the pressure washer to the power supply
- 10 Switching the pressure washer on and off
- 11 Operating the pressure washer
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Spare Parts and Accessories
- 21 Disposal
- 22 EC Declaration of Conformity
0458-616-0121-A
24
English
13 Transporting
► Remove the high-pressure hose and let the rest of the
water run out of the high-pressure hose.
► Remove and clean the nozzle and spray lance.
► Remove the spray gun and let the rest of the water run out
of the spray gun.
► Cleaning the pressure washer
► Wind up the high-pressure hose (1) and hang it on the
holder(2).
► Wind the connecting cord (3) onto the holders (4).
► Secure the connecting cord (3) with the clip(5).
► Insert the spray set (6).
► Insert nozzle (7).
► Store the spray attachment in the holders (8) on the
pressure washer.
12.2 Protecting the pressure washer with antifreeze
If the pressure washer cannot be protected from frost during
transport or storage, the pressure washer should be
protected by a glycol-based antifreeze. The antifreeze
prevents water inside the pressure washer from freezing and
causing damage to the pressure washer.
► Remove spray lance
► Connect the shortest possible water hose to the pressure
washer.
The shorter the water hose, the less antifreeze is needed.
► Mix the antifreeze as described in the antifreeze
Instruction Manual.
► Pour antifreeze into a clean container.
► Insert water hose into container of antifreeze.
► Squeeze and hold spray gun trigger.
► Switch on pressure washer.
► Hold down spray gun trigger until an even jet of antifreeze
is delivered from the spray gun and point the spray gun
into the container.
► Press and release spray gun trigger several times.
► Switch off pressure washer and unplug mains plug from
the socket.
► Detach spray gun, high-pressure hose and water hose
and allow antifreeze to run into the container.
► Store and dispose of antifreeze in accordance with the
applicable regulations and in an environmentally
responsible manner.
13.1 Transporting the pressure washer
► Switch off the pressure washer and pull the mains plug out
of the socket.
► Empty or secure the detergent container so that it cannot
topple over or fall and cannot move.
7
0000-GXX-5307-A0
6
1
4
3
2
5
8
0000-GXX-5308-A0
8
8
8
8
13 Transporting