Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 4.1 Warning symbols
- 4.2 Intended use
- 4.3 Requirements concerning the user
- 4.4 Clothing and equipment
- 4.5 Work area and surroundings
- 4.6 Safe condition
- 4.7 Operation
- 4.8 Detergents
- 4.9 Connecting the water supply
- 4.10 Connecting to the power supply
- 4.11 Transport
- 4.12 Storage
- 4.13 Cleaning, servicing and repairs
- 5 Safety instructions - Accessories
- 6 Preparing the pressure washer for operation
- 7 Assembling the pressure washer
- 8 Connecting to a water source
- 9 Connecting the pressure washer to the power supply
- 10 Switching the pressure washer on and off
- 11 Operating the pressure washer
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Spare Parts and Accessories
- 21 Disposal
- 22 EC Declaration of Conformity
0458-616-0121-A
21
English
10 Switching the pressure washer on and off
10.1 Switching on the pressure washer.
When the pressure washer is switched on, voltage
fluctuations may occur under unfavorable mains conditions
with a power line impedance greater than 0.15Ohm. The
voltage fluctuations may negatively affect other connected
electrical appliances.
► Set the toggle switch to the I position.
10.2 Switching off the pressure washer.
► Set the toggle switch to the 0 position.
11.1 Holding and controlling the spray gun
► Hold the spray gun by the handle with one hand, wrapping
your thumb around the handle.
► Hold the spray lance firmly with your other hand, wrapping
your thumb around the spray lance.
► Point the nozzle at the ground.
10 Switching the pressure washer on and
off
0000-GXX-5305-A00000-GXX-5306-A0
11 Operating the pressure washer
0000-GXX-4359-A0