Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 4.1 Warning symbols
- 4.2 Intended use
- 4.3 Requirements concerning the user
- 4.4 Clothing and equipment
- 4.5 Work area and surroundings
- 4.6 Safe condition
- 4.7 Operation
- 4.8 Detergents
- 4.9 Connecting the water supply
- 4.10 Connecting to the power supply
- 4.11 Transport
- 4.12 Storage
- 4.13 Cleaning, servicing and repairs
- 5 Safety instructions - Accessories
- 6 Preparing the pressure washer for operation
- 7 Assembling the pressure washer
- 8 Connecting to a water source
- 9 Connecting the pressure washer to the power supply
- 10 Switching the pressure washer on and off
- 11 Operating the pressure washer
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Spare Parts and Accessories
- 21 Disposal
- 22 EC Declaration of Conformity
0458-616-0121-A
16
English
7 Assembling the pressure washer
Inserting the nozzles
► Insert the flat jet nozzle (1) and rotary nozzle (2).
Attaching the spray set
► Insert the spray set (1).
7.2 Fitting and removing the high-pressure hose
7.2.1 Connecting the high-pressure hose
► Push the coupling(1) into the connector(2).
► Screw the union nut(3) onto the connector (2).
► If the coupling (1) cannot be easily pushed into the
connector: Grease the coupling (1) with grease for fittings.
► If the union nut (3) cannot be easily screwed onto the
connector: Grease the union nut (3) with grease for
fittings.
7.2.2 Removing the high-pressure hose
► Screw off union nut (1)
► Pull out the high-pressure hose.
0000-GXX-5296-A0
1
2
0000-GXX-5295-A0
1
2
0000-GXX-5297-A0
1
3
0000-GXX-5298-A0
1