Instruction Manual

ManualsBrandsSTIHL ManualsPressure WashersPressure washer: Sturdy and compact high-pressure cleaner

Table Of Contents

1 Introduction
2 Guide to Using this Manual
- 2.1 Applicable documents
- 2.2 Warning Notices in Text
- 2.3 Symbols in Text
3 Overview
- 3.1 Pressure washer
- 3.2 Spray attachment
- 3.3 Symbols
4 Safety Precautions
- 4.1 Warning symbols
- 4.2 Intended use
- 4.3 Requirements concerning the user
- 4.4 Clothing and equipment
- 4.5 Work area and surroundings
- 4.6 Safe condition
- 4.7 Operation
- 4.8 Detergents
- 4.9 Connecting the water supply
- 4.10 Connecting to the power supply
- 4.11 Transport
- 4.12 Storage
- 4.13 Cleaning, servicing and repairs
5 Safety instructions - Accessories
- 5.1 Spray lance extension, surface cleaner, pipe cleaning kit, angled spray lance and angled nozzle
6 Preparing the pressure washer for operation
- 6.1 Preparing the pressure washer for operation
7 Assembling the pressure washer
- 7.1 Assembling the pressure washer
- 7.2 Fitting and removing the high-pressure hose
  - 7.2.1 Connecting the high-pressure hose
  - 7.2.2 Removing the high-pressure hose
- 7.3 Attaching and removing the spray gun
  - 7.3.1 Attaching the spray gun
  - 7.3.2 Removing the spray gun
- 7.4 Attaching and removing the spray lance
  - 7.4.1 Attaching the spray lance
  - 7.4.2 Removing the spray lance
- 7.5 Attaching and removing the nozzle
  - 7.5.1 Attaching the nozzle
  - 7.5.2 Removing the nozzle
8 Connecting to a water source
- 8.1 Connecting the water filter
- 8.2 Connecting the pressure washer to the water supply
- 8.3 Connect pressure washer to another water source
9 Connecting the pressure washer to the power supply
- 9.1 Connecting the pressure washer to an electric power supply
10 Switching the pressure washer on and off
- 10.1 Switching on the pressure washer.
- 10.2 Switching off the pressure washer.
11 Operating the pressure washer
- 11.1 Holding and controlling the spray gun
- 11.2 Squeezing and locking the spray gun trigger
- 11.3 Cleaning
- 11.4 Using detergents
12 After Finishing Work
- 12.1 After finishing work
- 12.2 Protecting the pressure washer with antifreeze
13 Transporting
- 13.1 Transporting the pressure washer
14 Storing
- 14.1 Storing the pressure washer
15 Cleaning
- 15.1 Cleaning the pressure washer and accessories
- 15.2 Cleaning the nozzle and spray lance
- 15.3 Cleaning the water intake screen
- 15.4 Cleaning the water filter
16 Maintenance
- 16.1 Maintenance intervals
17 Repairing
- 17.1 Repairing the pressure washer
18 Troubleshooting
- 18.1 Correcting faults in the pressure washer
- 18.2 Lubricating the seals
19 Specifications
- 19.1 Pressure washer STIHL RE 100
- 19.2 Extension Cords
- 19.3 Sound and Vibration Levels
- 19.4 REACH
20 Spare Parts and Accessories
- 20.1 Spare Parts and Accessories
21 Disposal
- 21.1 Disposing of the pressure washer
22 EC Declaration of Conformity
- 22.1 STIHL RE 100 pressure washer

{

STIHL RE 100

Instruction Manual

Summary of content (36 pages)

PAGE 1
{ STIHL RE 100 Instruction Manual
PAGE 2
PAGE 3
English © ANDREAS STIHL AG & Co. KG 2018 0458-616-0121-A. VA0.E18. 0000007909_006_GB Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. Translation of Original Instruction Manual Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 2.1 2.2 2.3 Guide to Using this Manual . . . . . . . . . . . . . . . . . . . . Applicable documents . . . . . . . . . . . . . . . . . . . . . . . . . Warning Notices in Text .
PAGE 4
English 17 Repairing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 17.1 Repairing the pressure washer . . . . . . . . . . . . . . . . . . . . . 26 18 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 18.1 Correcting faults in the pressure washer . . . . . . . . . . . 28 18.2 Lubricating the seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 19 Specifications . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 5
English 3 Overview 2.2 Warning Notices in Text DANGER This notice refers to risks which result in serious or fatal injury. ► Serious or fatal injuries can be avoided by taking the precautions mentioned. 3 Overview 3.1 Pressure washer 1 WARNING This notice refers to risks which can result in serious or fatal injury. ► Serious or fatal injuries can be avoided by taking the precautions mentioned. NOTICE This notice refers to risks which can result in damage to property.
PAGE 6
English 3 Overview 1 Handle The handle is used to carry and move the pressure washer. 15 Cleaning pin The cleaning pin is used to clean the nozzle. 2 Holder The holder is used to store the spray gun. # Rating plate with serial number 3 Holder The holder is used to store the spray attachment. 4 Carrying handle The carrying handle is used to carry the pressure washer. 3.2 Spray attachment 1 2 3 4 5 5 Socket The socket is used to connect the water hose.
PAGE 7
English 4 Safety Precautions 8 Coupling The coupling connects the high-pressure hose with the high-pressure pump. LWA 9 Connector The connector connects the high-pressure hose with the spray gun. 10 Cleaning pin The cleaning pin is provided to clean the nozzles. 11 Spraying set The spraying set is used for cleaning with detergents. 12 Bottle The bottle contains the detergent. 13 Spray nozzle The spray nozzle mixes the detergent with the water.
PAGE 8
English 4 Safety Precautions If the connecting cord or extension cord is damaged: Unplug the mains plug from the socket. Do not connect the pressure washer directly to the drinking water main. Switch off pressure washer when taking a break from operation and for transport, storage, servicing or repairs. Do not use, transport or store the pressure washer at temperatures below 0° C. 4.
PAGE 9
English 4 Safety Precautions ► Wear close fitting safety glasses. Suitable safety glasses tested to standard EN 166 or national standards and bearing the corresponding mark are available to buy. ► Wear a long sleeved, close fitting top and long trousers. ￭ Spray (aerosols) may form while operating. Breathing in aerosols can be harmful to health and trigger allergic reactions. ► Carry out a risk assessment according to the surface to be cleaned and the surrounding area.
PAGE 10
English WARNING ￭ Parts that are not in a safe condition cannot function properly and safety devices can be disabled. People can be seriously injured or killed. ► Never use a damaged pressure washer. ► Never use a damaged high-pressure hose, couplings or spray attachment. ► Attach the high-pressure hose, couplings and spray attachment as described in this Instruction Manual. ► Never use a damaged connecting cord, extension cord or mains plug.
PAGE 11
4 Safety Precautions ￭ At temperatures below 0° C water can freeze on the surface to be cleaned and in the components of the pressure washer. The user may slip, fall and be seriously injured. Property may be damaged. ► Do not use the pressure washer at temperatures below 0° C. ￭ Pulling on the high-pressure hose, water hose or connecting cord can cause the pressure washer to move and topple over. Property may be damaged. ► Do not pull on the high-pressure hose, water hose or connecting cord.
PAGE 12
English 4 Safety Precautions ￭ Drawing in flammable and explosive liquids can cause fires and explosions. This can result in serious injuries or death and damage to property. ► Do not draw in or spray flammable or explosive liquids. ￭ Drawing in irritant, corrosive and toxic liquids can endanger health and damage components of the pressure washer. This can result in serious injuries or death and damage to property. ► Do not draw in or spray irritant, corrosive or toxic liquids.
PAGE 13
English 4 Safety Precautions 4.8 Detergents WARNING ￭ If detergents come into contact with the skin or eyes, the skin or eyes may be irritated. ► Observe the Instruction Manual for the detergent. ► Avoid contact with detergents. ► If skin contact occurs: Wash affected areas of skin with plenty of water and soap. ► If eye contact occurs: Flush eyes with plenty of water for at least 15 minutes and consult a doctor.
PAGE 14
English ￭ A damaged or unsuitable extension cord can result in electric shock. People can be seriously injured or killed. ► Use an extension cord with the correct cross-section, @ 19.2. ► Only use an extension cord which is splash-proof and approved for outdoor use. ► Use an extension cord that has the same characteristics as the connecting cord of the pressure washer, @ 19.
PAGE 15
English 4 Safety Precautions 4.12 Storage 4.13 Cleaning, servicing and repairs ￭ Children are not aware of and cannot assess the dangers of the pressure washer. Children can be seriously injured. ► Lock spray gun trigger. ￭ If the mains plug is plugged into a socket when carrying out cleaning, servicing or repairs, it is possible for the pressure washer to be switched on inadvertently. This can result in serious injuries and damage to property. ► Lock the spray gun trigger.
PAGE 16
English 5.1 Spray lance extension, surface cleaner, pipe cleaning kit, angled spray lance and angled nozzle ￭ 1 0000-GXX-5101-A0 5 Safety instructions - Accessories 5 Safety instructions - Accessories Spray lance extension WARNING ￭ The spray lance extension intensifies the reactive forces. The reactive forces occurring may cause the user to lose control of the spray attachment. The user may be seriously injured and property may be damaged. ► Attach only one spray lance extension.
PAGE 17
English 6 Preparing the pressure washer for operation Angled spray lance and angled nozzle WARNING ￭ An angled spray lance and the angled nozzle intensify the lateral reactive forces. The reactive forces occurring may cause the user to lose control of the spray attachment. The user may be seriously injured and property may be damaged. ► Attach only one spray lance extension. 7 Assembling the pressure washer 7.
PAGE 18
English 7 Assembling the pressure washer 7.2 Inserting the nozzles 7.2.1 Fitting and removing the high-pressure hose Connecting the high-pressure hose 1 31 0000-GXX-5297-A0 0000-GXX-5296-A0 2 2 ► Insert the flat jet nozzle (1) and rotary nozzle (2). ► Push the coupling (1) into the connector (2). ► Screw the union nut (3) onto the connector (2). ► If the coupling (1) cannot be easily pushed into the connector: Grease the coupling (1) with grease for fittings.
PAGE 19
English 7 Assembling the pressure washer 7.3 7.3.1 Attaching and removing the spray gun 7.4 Attaching the spray gun 7.4.1 Attaching and removing the spray lance Attaching the spray lance 2 2 1 0000-GXX-4348-A0 0000-GXX-4350-A0 1 ► Slide the socket (1) into the spray gun (2). The socket (1) audibly engages. ► If the socket (1) cannot be easily pushed into the spray gun (2): Grease the seal on the socket (1) with grease for fittings. ► Push spray lance (1) into spray gun (2).
PAGE 20
English 8 Connecting to a water source Attaching the nozzle 8.1 1 4 3 2 ► If attaching the fan-jet nozzle: Align the nozzle (1) so that the lug (2) lines up with the recess (3) in the spray lance (4). ► Push the nozzle (1) into the spray lance (4). The nozzle (1) audibly engages. ► If the nozzle (1) cannot be pushed easily into the spray lance (4): Grease the gasket on the nozzle (1) with grease for fittings. 7.5.
PAGE 21
English 8 Connecting to a water source 8.2 Connecting the pressure washer to the water supply Removing the water hose Connecting the water hose 2 The water hose must meet the following requirements: – The diameter of the water hose is 1/2“. ► Connect the water hose to a water tap. ► Open the water tap completely and flush the water hose with water. Sand and dirt are flushed out of the water hose. The water hose is vented.
PAGE 22
English 9 Connecting the pressure washer to the power supply Connect the water filter If the pressure washer is operated with water containing sand from water butts, cisterns or from flowing or still rivers and lakes, a water filter must be connected between the water hose and the pressure washer. Depending on the market, the water filter may be included with the pressure washer. 2 0000-GXX-5302-A0 3 1 ► Unscrew connector (1). ► Screw water filter (2) onto the connector (3) and tighten by hand.
PAGE 23
English 10 Switching the pressure washer on and off 10 Switching the pressure washer on and off 11 Operating the pressure washer 10.1 Switching on the pressure washer. 11.1 Holding and controlling the spray gun 0000-GXX-5305-A0 When the pressure washer is switched on, voltage fluctuations may occur under unfavorable mains conditions with a power line impedance greater than 0.15 Ohm. The voltage fluctuations may negatively affect other connected electrical appliances.
PAGE 24
English 11 Operating the pressure washer 11.2 Squeezing and locking the spray gun trigger 11.3 Cleaning According to the application, the following nozzles can be used: Pressing the spray gun trigger – Fan-jet nozzle: The fan-jet nozzle is designed for cleaning large areas. – Rotary nozzle: The rotary nozzle is designed for removing stubborn dirt. 1 The user can work close up to the surface in order to remove stubborn dirt. 0000-GXX-4360-A0 2 ► Slide retaining latch (1) to the position.
PAGE 25
English 12 After Finishing Work ► Adjust the fan-jet nozzle so that the surface to be cleaned is not damaged. 3 500 ml 400 ml 0000-GXX-5097-A0 4 300 ml 0000-GXX-5094-A0 200 ml ► Move the spray attachment evenly along the surface to be cleaned. ► Move forward slowly in a controlled manner. 11.4 Using detergents Detergents can improve the cleaning effect of the water. The supplied STIHL spray set must be used.
PAGE 26
English 13 Transporting ► Remove the high-pressure hose and let the rest of the water run out of the high-pressure hose. ► Remove and clean the nozzle and spray lance. ► Remove the spray gun and let the rest of the water run out of the spray gun. ► Cleaning the pressure washer 1 2 3 5 6 4 0000-GXX-5307-A0 7 ► Wind up the high-pressure hose (1) and hang it on the holder (2). ► Wind the connecting cord (3) onto the holders (4). ► Secure the connecting cord (3) with the clip (5).
PAGE 27
English 14 Storing – If the pressure washer cannot be protected from frost in storage: Protect the pressure washer with antifreeze. 1 0000-GXX-5309-A0 2 ► If the pressure washer is being pulled: Pull the pressure washer by the handle (1). ► If the pressure washer is being carried: Carry the pressure washer by the handle (1) and carrying handle (2).
PAGE 28
English 16 Maintenance 1 1 2 3 4 0000-GXX-4370-A0 0000-GXX-4373-A0 5 ► If the nozzle is blocked up: Clean the nozzle with the cleaning pin. ► ► ► ► ► Remove gasket (1) from the fastener (2). Unscrew fastener (2) from filter housing (5). Remove gasket (3) from the fastener (2). Remove filter (4) from the filter housing (5). Rinse gaskets (1 and 3), fastener (2) and filter (4) under running water. ► Grease the gaskets (1 and 3) with grease for fittings. ► Reassemble the water filter. 15.
PAGE 29
17 Repairing English ► If the pressure washer or accessory is damaged: Do not use the pressure washer or accessory. Consult a STIHL servicing dealer.
PAGE 30
English 18 Troubleshooting 18 Troubleshooting 18.1 Correcting faults in the pressure washer Fault Cause Remedy The pressure washer does The mains plug of the connecting cord or ► Plug in mains plug of connecting cord or not start although the extension cord is not plugged in. extension cord. spray gun trigger is squeezed. The circuit breaker (fuse) or the overload cutout ► Look for cause of tripping and remedy it. has tripped.
PAGE 31
English 18 Troubleshooting Fault Cause The fuse rating of the socket is too low. Remedy ► Plug the connecting cord into a socket with the correct fuse rating, @ 19.1. The electric motor is too warm. ► Allow the pressure washer to cool for 5 minutes. ► Clean the nozzle. There is a leak in the high-pressure pump, high- ► Ask a STIHL servicing dealer to inspect the pressure hose or spray attachment. pressure washer.
PAGE 32
English 19 Specifications 18.2 Lubricating the seals – Length of high-pressure hose: 6 m – Weight (m) with accessory attached: 16.6 kg 19.2 Extension Cords 1 1 1 ► Grease the seals (1) with grease for fittings. 19 Specifications 0000-GXX-5311-A0 1 If an extension cord is used, the cross sectional area of its conductors must meet the following minimum requirements – depending on the line voltage and length of the extension cord: 220 V to 240 V – Cord length up to 20 m: AWG 15 / 1.
PAGE 33
English 20 Spare Parts and Accessories For information on compliance with the REACH regulation see www.stihl.com/reach. 20 Spare Parts and Accessories 20.1 Spare Parts and Accessories These symbols identify original STIHL replacement parts and original STIHL accessories. STIHL recommends the use of original STIHL replacement parts and accessories. Original STIHL replacement parts and original STIHL accessories are available from STIHL servicing dealers. 21 Disposal 21.
PAGE 34
English 32 22 EC Declaration of Conformity 0458-616-0121-A
PAGE 35
PAGE 36
0458-616-0121-A englisch G www.stihl.