Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 4.1 Warning Symbols
- 4.2 Intended Use
- 4.3 Requirements concerning the user
- 4.4 Clothing and equipment
- 4.5 Work area and surroundings
- 4.6 Safe condition
- 4.7 Working
- 4.8 Detergents
- 4.9 Connecting the water supply
- 4.10 Connecting to the power supply
- 4.11 Transport
- 4.12 Storage
- 4.13 Cleaning, Maintenance and Repair
- 4.14 Battery
- 5 Preparing the pressure washer for operation
- 6 Assembling the pressure washer
- 7 Connecting to a water source
- 8 Connecting the pressure washer to the power supply
- 9 Switching the pressure washer on and off
- 10 Operating the pressure washer
- 11 After Finishing Work
- 12 Transporting
- 13 Storing
- 14 Cleaning
- 15 Maintenance
- 16 Repairing
- 17 Troubleshooting
- 18 Specifications
- 19 Spare Parts and Accessories
- 20 Disposal
- 21 EC Declaration of Conformity
- 22 UKCA Declaration of Conformity
0458-004-0121-A
25
English
12 Transporting
► Hold down spray gun trigger until an even jet of antifreeze
is delivered from the spray gun and point the spray gun
into the container.
► Press and release spray gun trigger several times.
► Switch off pressure washer and unplug mains plug from
the socket.
► Detach spray gun and water hose and allow antifreeze to
run into the container.
► Store and dispose of antifreeze in accordance with the
applicable regulations and in an environmentally
responsible manner.
12.1 Transporting the high-pressure washer
► Switch off the high-pressure washer and pull the mains
plug out of the socket.
► Empty or secure the detergent container so that it cannot
topple over, fall down and cannot move.
Carrying or pulling the high-pressure washer
► Pull the high-pressure washer using handle (1).
► Carry the pressure washer by the handle (1) and the
carrying handle (2).
Transporting the high-pressure washer in a vehicle
► Secure the high-pressure washer so that it cannot turn
over or move.
► If the high-pressure washer cannot be transported in a
frost-proof environment: Protect the high-pressure washer
using antifreeze.
13.1 Storing the pressure washer
► Switch off pressure washer and unplug mains plug from
the socket.
► The pressure washer should be stored in such a way that
the following conditions are fulfilled:
– The pressure washer is out of the reach of children.
– The pressure washer is clean and dry.
– The pressure washer is in an enclosed room.
– The pressure washer is in a temperature range above
0°C.
– If the pressure washer cannot be protected from frost in
storage: Protect the pressure washer with antifreeze.
14.1 Cleaning the high-pressure washer and
accessories
► Switch off the high-pressure washer and pull the mains
plug out of the socket.
► Clean the high-pressure washer, high-pressure hose,
spray gun and accessories with a damp cloth.
► Clean the connectors and couplings on the high-pressure
washer, high-pressure hose and spray gun with a damp
cloth.
► Clean vents with a paintbrush.
12 Transporting
1
2
1
0000-GXX-1813-A0
13 Storing
14 Cleaning










