Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 4.1 Warning Symbols
- 4.2 Intended Use
- 4.3 Requirements concerning the user
- 4.4 Clothing and equipment
- 4.5 Work area and surroundings
- 4.6 Safe condition
- 4.7 Working
- 4.8 Detergents
- 4.9 Connecting the water supply
- 4.10 Connecting to the power supply
- 4.11 Transport
- 4.12 Storage
- 4.13 Cleaning, Maintenance and Repair
- 4.14 Battery
- 5 Preparing the pressure washer for operation
- 6 Assembling the pressure washer
- 7 Connecting to a water source
- 8 Connecting the pressure washer to the power supply
- 9 Switching the pressure washer on and off
- 10 Operating the pressure washer
- 11 After Finishing Work
- 12 Transporting
- 13 Storing
- 14 Cleaning
- 15 Maintenance
- 16 Repairing
- 17 Troubleshooting
- 18 Specifications
- 19 Spare Parts and Accessories
- 20 Disposal
- 21 EC Declaration of Conformity
- 22 UKCA Declaration of Conformity
0458-004-0121-A
13
English
4 Safety Precautions
► Route the connecting cord and extension cord so that
they are not under tension or tangled.
► Route the connecting cord and extension cord so that
they will not be damaged, kinked or crushed and will not
be chafed.
► Protect the connecting cord and extension cord from
heat, oil and chemicals.
► Lay the connecting cord and extension cord on a dry
surface.
￭ The extension cord warms up in operation. If that heat
cannot escape, it may cause a fire.
► If using a cable reel: Completely unroll the cable reel.
4.11 Transport
WARNING
￭ The pressure washer may topple over or move during
transport. Persons may be injured or property damaged.
► Lock the spray gun trigger.
► Unplug the mains plug of the high-pressure washer from
the socket.
► Secure the pressure washer using lashing straps, belts
or a net so that it cannot topple over and cannot move.
￭ At temperatures below 0° C water can freeze in the
components of the pressure washer. The pressure washer
may be damaged.
► Drain high-pressure hose and spray attachment.
4.12 Storage
WARNING
￭ Children are not aware of and cannot assess the dangers
of the pressure washer. Children can be seriously injured.
► Lock spray gun trigger.
► Unplug the mains plug of the pressure washer from the
socket.
► Store the pressure washer out of the reach of children.
￭ Moisture may cause the electrical contacts on the
pressure washer and metal components to corrode. The
pressure washer may be damaged.
► Store the pressure washer in a clean, dry state.
￭ At temperatures below 0 °C water may freeze in
components of the pressure washer. The pressure washer
may be damaged.
► Drain high-pressure hose and spray attachment.
► Switch off the high-pressure washer.
► Drain the detergent bottle or secure it so
that it cannot topple over and cannot move.
► If the pressure washer cannot be
transported in a frost-proof environment:
Protect the pressure washer using a glycol-
based antifreeze.
► Switch off pressure washer.
► If the pressure washer cannot be stored in a
frost-free environment: Protect the pressure
washer using a glycol-based antifreeze.