Instruction Manual

MSE 170 C, MSE 210 C
English
29
Preparations
N Thoroughly clean the oil filler cap (1)
and the area around it to ensure that
no dirt falls into the tank.
N Position the machine so that the
filler cap faces up.
Opening
N Raise handle.
N Twist filler cap counterclockwise
(approx. 1/4 turn).
Markings on filler cap and housing must
align.
N Remove the filler cap.
Filling up with chain oil
Take care not to spill chain oil while
refilling and do not overfill the tank –
leave approx. 1/2" (13 mm) air space.
N Fill up with chain oil.
Closing
Handle is in an upright position:
N Position filler cap – markings on filler
cap and housing must align.
N Push the filler cap down as far as it
will go.
N Push the filler cap down and twist it
clockwise until it engages.
Then the markings on filler cap and
housing will align.
Filling Chain Oil Tank
9931BA039 KN
1
001BA236 KN
001BA251 KN
001BA252 KN
001BA237 KN
001BA252 KN
001BA253 KN
001BA254 KN