Instruction Manual

MSE 170 C, MSE 210 C
English
26
WARNING
Do not connect the power tool to the wall
outlet yet.
Removing the chain sprocket cover
N Pull the hinged handle (1) out until it
engages in the upright position.
N Turn the wingnut (2)
counterclockwise until it hangs
loose in the sprocket cover (3).
N Remove the chain sprocket
cover (3).
Fitting the tensioning gear
N Remove the tensioning gear (1) and
turn it over.
N Take out the screw (2).
N Line up the tensioning gear (1) and
guide bar (3).
N Insert the screw (2) and tighten it
down firmly.
Disengage the chain brake.
N Pull the hand guard towards the
front handle until there is an audible
click – the chain brake is
disengaged.
Fitting the chain
WARNING
Wear work gloves to protect your hands
from the sharp cutters.
Mounting the Bar and Chain
(quick chain tensioner)
3
9931BA019 KN
1
9931BA025 KN
1
2310BA015 KN
2
1
3
2310BA016 KN
2
2310BA017 KN
9931BA015 KN