Instruction Manual
Table Of Contents
- STIHL MSE 170 C, 190 C, 210 C, 230 C
- 1 Guide to Using this Manual
- 2 Safety Precautions
- 3 Reactive Forces
- 4 Working Techniques
- 5 Packing List
- 6 Cutting Attachment
- 7 Mounting the Bar and Chain (side chain tensioner)
- 8 Mounting the Bar and Chain (quick chain tensioner)
- 9 Tensioning the Saw Chain (side chain tensioner)
- 10 Tensioning the Saw Chain (quick chain tensioner)
- 11 Checking Chain Tension
- 12 Chain Lubricant
- 13 Filling Chain Oil Tank
- 14 Checking Chain Lubrication
- 15 Coasting Brake
- 16 Chain Brake
- 17 Connecting to Power Supply
- 18 Switching On
- 19 Switching Off
- 20 Overload Cutout
- 21 Operating Instructions
- 22 Taking Care of the Guide Bar
- 23 Motor Cooling
- 24 Storing the Machine
- 25 Checking and Replacing the Chain Sprocket
- 26 Maintaining and Sharpening the Saw Chain
- 27 Maintenance and Care
- 28 Minimize Wear and Avoid Damage
- 29 Main Parts
- 30 Specifications
- 31 Ordering Spare Parts
- 32 Maintenance and Repairs
- 33 Disposal
- 34 EC Declaration of Conformity
- 35 General Power Tool Safety Warnings
30.4.2 Rollomatic E Mini guide bars
Cutting lengths: 30, 35, 40 cm
Pitch: 3/8" P (9.32 mm)
Groove width: 1.1 mm
Nose sprocket: 7-tooth
30.4.3 3/8" Picco chain
Picco Micro Mini 3 (61 PMM3) Type 3610
Pitch: 3/8" P
(9.32 mm)
Drive link gauge: 1.1 mm
30.4.4 Rollomatic E guide bars
Cutting lengths: 30, 35, 40 cm
Pitch: 3/8" P (9.32 mm)
Groove width: 1.3 mm
Nose sprocket: 9-tooth
30.4.5 3/8" Picco chain
Picco Micro 3 (63 PM3) Type 3636
Picco Duro 3 (63 PD3) Type 3612
Pitch: 3/8" P
(9.32 mm)
Drive link gauge: 1.3 mm
30.4.6 Carving guide bars
Cutting lengths: 25, 30 cm
Pitch: 1/4" (6.35 mm)
Groove width: 1.3 mm
30.4.7 1/4" chains
Rapid Micro Spezial (13 RMS) Type 3661
Pitch: 1/4" (6.35 mm)
Drive link gauge: 1.3 mm
30.4.8 Chain sprocket
6-tooth for 3/8" P
8-tooth for 1/4"
30.5 Cutting Attachment
(MSE 190 C, MSE 210 C,
MSE 230 C)
Actual cutting length may be less than the speci‐
fied length
30.5.1 Rollomatic E Light and Rollomatic E
guide bars
Cutting lengths: 30, 35, 40 cm
Pitch: 3/8" P (9.32 mm)
Groove width: 1.3 mm
Nose sprocket: 9-tooth
30.5.2 3/8" Picco chain
Picco Micro 3 (63 PM3) Type 3636
Picco Duro 3 (63 PD3) Type 3612
Pitch: 3/8" P
(9.32 mm)
Drive link gauge: 1.3 mm
30.5.3 Rollomatic E guide bars
Cutting lengths: 45 cm
Pitch: 3/8" P (9.32 mm)
Groove width: 1.3 mm
Nose sprocket: 9-tooth
30.5.4 3/8" Picco chain
Picco Micro 3 (63 PM3) Type 3636
Pitch: 3/8" P
(9.32 mm)
Drive link gauge: 1.3 mm
30.5.5 Carving guide bars
Cutting lengths: 25, 30 cm
Pitch: 1/4" (6.35 mm)
Groove width: 1.3 mm
30.5.6 1/4" chains
Rapid Micro Spezial (13 RMS) Type 3661
Pitch: 1/4" (6.35 mm)
Drive link gauge: 1.3 mm
30.5.7 Chain sprocket
MSE 190 C
6-tooth for 3/8" P
8-tooth for 1/4"
MSE 210 C and MSE 230 C
7-tooth for 3/8" P
8-tooth for 1/4"
30.6 Noise and Vibration Data
Noise data is determined on the basis of the
rated maximum speed.
Vibration data is determined on the basis of the
full load operating mode.
For further details on compliance with Vibration
Directive 2002/44/EC see www.stihl.com/vib.
30.6.1 Sound pressure level L
p
to
EN 60745‑2‑13
MSE 170 C: 92 dB(A)
MSE 190 C: 92 dB(A)
MSE 210 C: 93 dB(A)
MSE 230 C: 93 dB(A)
30.6.2 Sound power level L
w
to
EN 60745‑2‑13
MSE 170 C: 103 dB(A)
MSE 190 C: 103 dB(A)
MSE 210 C: 104 dB(A)
MSE 230 C: 104 dB(A)
English 30 Specifications
34 0458-756-0121-B