Instruction Manual
Table Of Contents
- STIHL MSE 170 C, 190 C, 210 C, 230 C
- 1 Guide to Using this Manual
- 2 Safety Precautions
- 3 Reactive Forces
- 4 Working Techniques
- 5 Packing List
- 6 Cutting Attachment
- 7 Mounting the Bar and Chain (side chain tensioner)
- 8 Mounting the Bar and Chain (quick chain tensioner)
- 9 Tensioning the Saw Chain (side chain tensioner)
- 10 Tensioning the Saw Chain (quick chain tensioner)
- 11 Checking Chain Tension
- 12 Chain Lubricant
- 13 Filling Chain Oil Tank
- 14 Checking Chain Lubrication
- 15 Coasting Brake
- 16 Chain Brake
- 17 Connecting to Power Supply
- 18 Switching On
- 19 Switching Off
- 20 Overload Cutout
- 21 Operating Instructions
- 22 Taking Care of the Guide Bar
- 23 Motor Cooling
- 24 Storing the Machine
- 25 Checking and Replacing the Chain Sprocket
- 26 Maintaining and Sharpening the Saw Chain
- 27 Maintenance and Care
- 28 Minimize Wear and Avoid Damage
- 29 Main Parts
- 30 Specifications
- 31 Ordering Spare Parts
- 32 Maintenance and Repairs
- 33 Disposal
- 34 EC Declaration of Conformity
- 35 General Power Tool Safety Warnings
8 Mounting the Bar and
Chain (quick chain ten‐
sioner)
WARNING
Do not connect the power tool to the wall outlet
yet.
8.1 Removing the chain sprocket
cover
3
9931BA019 KN
1
► Pull the hinged handle (1) out until it engages
in the upright position.
► Turn the wingnut (2) counterclockwise until it
hangs loose in the sprocket cover (3).
► Remove the chain sprocket cover (3).
8.2 Fitting the tensioning gear
9931BA025 KN
1
► Remove the tensioning gear (1) and turn it
over.
2310BA015 KN
2
► Take out the screw (2).
1
3
2310BA016 KN
► Line up the tensioning gear (1) and guide
bar (3).
2
2310BA017 KN
► Insert the screw (2) and tighten it down firmly.
8.3 Disengage the chain brake.
9931BA015 KN
► Pull the hand guard towards the front handle
until there is an audible click – the chain brake
is disengaged.
8 Mounting the Bar and Chain (quick chain tensioner) English
0458-756-0121-B 17