Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Main Parts
- 4 Safety Symbols on the Product
- 5 General Power Tool Safety Warnings
- 6 IMPORTANT SAFETY INSTRUCTIONS
- 7 Kickback and Other Reactive Forces
- 8 Proper Techniques for Basic Bucking, Limbing, Pruning and Felling
- 9 Maintenance, Repair and Storage
- 10 Before Starting Work
- 11 Assembling the Chain Saw
- 12 The Chain Brake
- 13 Overload Cutout
- 14 Switching the Chain Saw On and Off
- 15 Checking the Chain Saw
- 16 After Finishing Work
- 17 Transporting
- 18 Storing
- 19 Cleaning
- 20 Inspection and Maintenance
- 21 Troubleshooting Guide
- 22 Specifications
- 23 Combinations of Guide Bars and Saw Chains
- 24 Replacement Parts and Equipment
- 25 Disposal
- 26 Limited Warranty
- 27 Trademarks
- 28 Addresses
- 1 Introducción
- 2 Acerca de este manual de instrucciones
- 3 Componentes importantes
- 4 Símbolos de seguridad en el producto
- 5 Advertencias generales de seguridad para herramientas motorizadas
- 6 INSTRUCCIONES IMPORTANTES DE SEGURIDAD
- 7 Contragolpe y otras fuerzas reactivas
- 8 Técnicas adecuadas para el tronzado, el desramado, la poda y la tala básicos
- 9 Mantenimiento, reparación y almacenamiento
- 10 Antes de empezar a trabajar
- 11 Armado de la motosierra
- 12 El freno de cadena
- 13 Disyuntor de sobrecarga
- 14 Encendido y apagado de la motosierra
- 15 Revisión de la motosierra
- 16 Después de completar el trabajo
- 17 Transporte
- 18 Almacenamiento
- 19 Limpieza
- 20 Inspección y mantenimiento
- 21 Guía de solución de problemas
- 22 Especificaciones
- 23 Combinaciones de espadas y cadenas de aserrado
- 24 Piezas y equipos de repuesto
- 25 Eliminación
- 26 Garantía limitada
- 27 Marcas comerciales
- 28 Direcciones
0458-729-8621-A
50
English
23 Combinations of Guide Bars and Saw Chains
23.1 STIHL MSE 141 C
The guide bar and chain combinations listed above meet the
45° computed kickback angle requirement of UL 60745-2-13
when used on this model chain saw with the matching chain
sprocket listed above.
Use replacement guide bars or chains only as listed above
or as listed elsewhere by STIHL as conforming with the 45°
computed kickback angle requirement of UL 60745-2-13
when used on this model chain saw.
The listed guide bars are green-labeled reduced kickback
STIHL guide bars. The listed chains are green-labeled low
kickback STIHL chains.
Since new bar/chain combinations may be developed after
publication of this manual, ask your authorized STIHL
servicing dealer for the latest STIHL recommendations.
23 Combinations of Guide Bars and Saw Chains
Pitch Drive link
gauge/Groove
width
Length Guide Bar Number of teeth
of sprocket nose
Drive link
count
Saw chain
1/4" P
0.043 in.
(1.1 mm)
10 in. (25 cm)
Rollomatic E Mini 8
56
71 PM3 (Type 3670)12 in. (30 cm) 64
14 in. (35 cm) 72
3/8" P
0.043 in.
(1.1 mm)
12 in. (30 cm)
Rollomatic E Mini 7
45
61 PMM3
(Type 3610)
14 in. (35 cm) 50
16 in. (40 cm) 55