Instruction Manual

19.6 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
20 Bar and Chain Combinations
20.1 STIHL MSA 220 C Chainsaw
Pitch Drive link
gauge/groove
width
Length Guide bar Number of
teeth, spro‐
cket nose
Number of
drive links
Saw chain
3/8" P 1.3 mm
30 cm
Rollomatic E
Rollomatic E light
9
44
3/8" PS3
CM 35 50
CM 40 55
30 cm 44
3/8" PSCM 35 50
CM 40 55
30 cm 44
3/8" PM3CM 35 50
CM 40 55
30 cm 44
3/8" PD3CM 35 50
CM 40 55
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. The actual
cutting length of a guide bar may be less than the specified length.
21 Spare Parts and Accesso‐
ries
21.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
22 Disposal
22.1 Disposing of Chainsaw and
Battery
Information on disposal is available from STIHL
servicing dealers.
► Dispose of the saw, guide bar, saw chain, bat‐
tery, accessories and packaging in accord‐
ance with local regulations and environmental
requirements.
23 EC Declaration of Con‐
formity
23.1 STIHL MSA 220 C Chainsaw
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
–
Category: Cordless chainsaw
–
Manufacturer's brand: STIHL
–
Model: MSA 220 C, Serial identification: 1251
conforms to the specifications of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and built in
compliance with the versions of the following
standards valid at the production date:
EN 55014‑1, EN 55014‑2, EN 60745‑1 and
EN 60745‑2‑13.
The EC type examination test was carried out
pursuant to Directive 2006/42/EC, Art. 12.3(b) at:
20 Bar and Chain Combinations English
0458-795-9621-B 53