Instruction Manual
Table Of Contents
- STIHL MSA 220 C
- 1 Vorwort
- 2 Informationen zu dieser Gebrauchsanleitung
- 3 Übersicht
- 4 Sicherheitshinweise
- 5 Motorsäge einsatzbereit machen
- 6 Motorsäge zusammenbauen
- 7 Kettenbremse einlegen und lösen
- 8 Akku einsetzen und herausnehmen
- 9 Motorsäge einschalten und ausschalten
- 10 Motorsäge und Akku prüfen
- 11 Mit der Motorsäge arbeiten
- 12 Nach dem Arbeiten
- 13 Transportieren
- 14 Aufbewahren
- 15 Reinigen
- 16 Warten
- 17 Reparieren
- 18 Störungen beheben
- 19 Technische Daten
- 20 Kombinationen der Führungsschienen und Sägeketten
- 21 Ersatzteile und Zubehör
- 22 Entsorgen
- 23 EU-Konformitätserklärung
- 24 Allgemeine Sicherheitshinweise für Elektrowerkzeuge
- 25 Anschriften
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing the Saw for Operation
- 6 Assembling the Saw
- 7 Engaging and Disengaging the Chain Brake
- 8 Removing and Fitting the Battery
- 9 Switching the Saw On/Off
- 10 Testing the Chain Saw and Battery
- 11 Operating the Saw
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Bar and Chain Combinations
- 21 Spare Parts and Accessories
- 22 Disposal
- 23 EC Declaration of Conformity
- 24 General Power Tool Safety Warnings
- 1 Préface
- 2 Informations concernant la présente Notice d'emploi
- 3 Vue d'ensemble
- 4 Prescriptions de sécurité
- 4.1 Symboles d'avertissement
- 4.2 Utilisation conforme à la destination prévue
- 4.3 Exigences posées à l'utilisateur
- 4.4 Vêtements et équipement
- 4.5 Aire de travail et voisinage
- 4.6 Bon état pour une utilisation en toute sécurité
- 4.7 Utilisation
- 4.8 Forces de réaction
- 4.9 Transport
- 4.10 Rangement
- 4.11 Nettoyage, entretien et réparation
- 5 Préparatifs avant l'utilisation de la tronçonneuse
- 6 Assemblage de la tronçonneuse
- 7 Serrage et desserrage du frein de chaîne
- 8 Introduction et extraction de la batterie
- 9 Mise en marche et arrêt de la tronçonneuse
- 10 Contrôle de la tronçonneuse et de la batterie
- 11 Travail avec la tronçonneuse
- 12 Après le travail
- 13 Transport
- 14 Rangement
- 15 Nettoyage
- 16 Maintenance
- 17 Réparation
- 18 Dépannage
- 19 Caractéristiques techniques
- 20 Combinaisons de guide-chaînes et de chaînes de tronçonneuse
- 21 Pièces de rechange et accessoires
- 22 Mise au rebut
- 23 Déclaration de conformité UE
- 24 Indications générales de sécurité pour outils électroportatifs
- 24.1 Introduction
- 24.2 Sécurité à l'endroit de travail
- 24.3 Sécurité sur le plan électrique
- 24.4 Sécurité des personnes
- 24.5 Utilisation et emploi soigneux d'outils électroportatifs
- 24.6 Utilisation et emploi soigneux d'outils électroportatifs sans fil
- 24.7 Service après-vente
- 24.8 Consignes de sécurité applicables aux scies à chaîne / tronçonneuses
- 24.9 Causes d'un rebond, et comment les éviter
- 1 Premessa
- 2 Informazioni sulle presenti Istruzioni d’uso
- 3 Sommario
- 4 Avvertenze di sicurezza
- 5 Preparare la motosega per l'esercizio
- 6 Assemblaggio della motosega
- 7 Inserire e sbloccare il freno catena
- 8 Inserire e togliere la batteria
- 9 Accendere e spegnere la motosega
- 10 Controllo di motosega e batteria
- 11 Lavorare con la motosega
- 12 Dopo il lavoro
- 13 Trasporto
- 14 Conservazione
- 15 Pulizia
- 16 Manutenzione
- 17 Riparazione
- 18 Eliminazione dei guasti
- 19 Dati tecnici
- 20 Combinazioni di spranghe di guida e catene della sega
- 21 Ricambi e accessori
- 22 Smaltimento
- 23 Dichiarazione di conformità UE
- 24 Avvertenze di sicurezza generali per attrezzi elettrici
- 24.1 Introduzione
- 24.2 Sicurezza sul posto di lavoro
- 24.3 Sicurezza elettrica
- 24.4 Sicurezza delle persone
- 24.5 Impiego e maneggio dell’attrezzo elettrico
- 24.6 Impiego e trattamento dell’attrezzo a batteria
- 24.7 Assistenza
- 24.8 Avvertenze di sicurezza per le seghe a catena
- 24.9 Cause e prevenzione del rimbalzo
- 1 Voorwoord
- 2 Informatie met betrekking tot deze handleiding
- 3 Overzicht
- 4 Veiligheidsinstructies
- 5 Motorzaag klaarmaken voor gebruik
- 6 Motorzaag completeren
- 7 Kettingrem inschakelen en lossen
- 8 Accu aanbrengen en wegnemen
- 9 Motorzaag inschakelen en uitschakelen
- 10 Kettingzaag en accu controleren
- 11 Met de motorzaag werken
- 12 Na de werkzaamheden
- 13 Vervoeren
- 14 Opslaan
- 15 Reinigen
- 16 Onderhoud
- 17 Repareren
- 18 Storingen opheffen
- 19 Technische gegevens
- 20 Combinaties van zaagbladen en zaagkettingen
- 21 Onderdelen en toebehoren
- 22 Milieuverantwoord afvoeren
- 23 EU-conformiteitsverklaring
- 24 Algemene veiligheidswaarschuwingen voor elektrische gereedschappen
- 24.1 Inleiding
- 24.2 Veiligheid op de werkplek
- 24.3 Elektrische veiligheid
- 24.4 Veiligheid van personen
- 24.5 Gebruik en behandeling van het elektrische gereedschap
- 24.6 Gebruik en behandeling van het accugereedschap
- 24.7 Service
- 24.8 Veiligheidsinstructies voor kettingzagen
- 24.9 Oorzaak en voorkomen van een terugslag
22 Button
Activates the LEDs on the battery.
# Rating Label with Serial Number
3.2 Symbols
Meanings of symbols that may be on the chain‐
saw and battery:
This symbol shows the direction of
rotation of the chain.
Turn in this direction to tension the saw
chain.
This symbol marks the chain oil tank.
The chain brake is engaged in this direc‐
tion.
The chain brake is disengaged in this
direction.
1 LED glows red. Battery too hot or too
cold.
4 LEDs flash red. There is a malfunc‐
tion in the battery.
Length of guide bar that may be used.
L
W
A
Guaranteed sound power level accord‐
ing to directive 2000/14/EC in dB(A) in
order to make sound emissions of
products comparable.
The data next to this symbol indicates the
energy content of the battery according to
the cell manufacturer’s specification. The
energy content available during operation
is lower.
Do not dispose of the product with your
household waste.
4 Safety Precautions
4.1 Warning Symbols
Meanings of warning symbols on the chainsaw
or the battery:
Observe safety notices and take the
necessary precautions.
Read, understand and keep the User
Manual.
Wear safety glasses, hearing protec‐
tion and a hard hat.
Observe the safety notices on kickback
and take the necessary precautions.
Remove the battery during work stop‐
pages, transport, storage, maintenance
or repair.
Protect battery from heat and fire.
Do not immerse battery in fluids.
Observe the permitted battery temper‐
ature range.
4.2 Intended Use
The STIHL MSA 220 C chainsaw is designed for
cutting wood, limbing and felling small diameter
trees, and maintaining trees.
The chainsaw may be used in the rain.
The chainsaw is powered by a STIHL AP battery
or a STIHL AR battery.
If it is necessary to work on a safe raised plat‐
form, the chainsaw may be used only with a
STIHL AP battery inserted directly in the saw.
WARNING
■
Batteries not explicitly approved for the chain‐
saw by STIHL may cause a fire or explosion.
This can result in serious or fatal injuries and
damage to property.
►
Use the chainsaw with a STIHL AP battery
or a STIHL AR battery.
■ Using the chainsaw or the battery for purposes
for which they were not intended may result in
serious or fatal injuries and damage to prop‐
erty.
►
Use the chainsaw as described in this
instruction manual.
► Use the battery as described in this instruc‐
tion manual or the instruction manual for
the STIHL AR battery.
4.3 The Operator
WARNING
■
Users without adequate training or instruction
cannot recognize or assess the risks involved
in using the chainsaw and battery. The user or
4 Safety Precautions English
0458-795-9621-B 33