Instruction Manual

j)
Follow instructions for lubricating, chain ten‐
sioning and changing the bar and chain.
Improperly tensioned or lubricated chain may
either break or increase the chance for kick‐
back.
k)
Cut wood only. Do not use chain saw for pur‐
poses not intended. For example: do not use
chain saw for cutting metal, plastic, masonry
or non-wood building materials. Use of the
chain saw for operations different than inten‐
ded could result in a hazardous situation.
l)
Do not attempt to fell a tree until you have an
understanding of the risks and how to avoid
them. Serious injury could occur to the opera‐
tor or bystanders while felling a tree.
m
)
Follow all instructions when clearing jammed
material, storing or servicing the chain saw.
Make sure the switch is off and the battery
pack is removed. Unexpected actuation of the
chain saw while clearing jammed material or
servicing may result in serious personal injury.
24.9 Causes and operator preven‐
tion of kickback
Kickback may occur when the nose or tip of the
guide bar touches an object, or when the wood
closes in and pinches the saw chain in the cut.
Tip contact in some cases may cause a sudden
reverse reaction, kicking the guide bar up and
back towards the operator.
Pinching the saw chain along the top of the
guide bar may push the guide bar rapidly back
towards the operator.
Either of these reactions may cause you to lose
control of the saw which could result in serious
personal injury. Do not rely exclusively upon the
safety devices built into your saw. As a chain
saw user, you should take several steps to keep
your cutting jobs free from accident or injury.
Kickback is the result of chain saw misuse and/or
incorrect operating procedures or conditions and
can be avoided by taking proper precautions as
given below:
–
Maintain a firm grip, with thumbs and fingers
encircling the chain saw handles, with both
hands on the saw and position your body and
arm to allow you to resist kickback forces.
Kickback forces can be controlled by the oper‐
ator, if proper precautions are taken. Do not let
go of the chain saw.
–
Do not overreach and do not cut above shoul‐
der height. This helps prevent unintended tip
contact and enables better control of the chain
saw in unexpected situations.
–
Only use replacement guide bars and saw
chains specified by the manufacturer. Incor‐
rect replacement guide bars and saw chains
may cause chain breakage and/or kickback.
–
Follow the manufacturer's sharpening and
maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead
to increased kickback.
Índice
1 Prólogo......................................................57
2 Informaciones relativas a estas instruccio‐
nes para la reparación.............................. 58
3 Sinopsis.................................................... 58
4 Indicaciones relativas a la seguridad........ 59
5 Preparar la motosierra para el trabajo...... 67
6 Ensamblar la motosierra........................... 68
7 Acoplar y desacoplar el freno de cadena..70
8 Colocar y sacar el acumulador................. 70
9 Conectar y desconectar la motosierra...... 71
10 Comprobar la motosierra y el acumulador71
11 Trabajar con la motosierra........................ 73
12 Después del trabajo.................................. 77
13 Transporte.................................................77
14 Almacenamiento....................................... 78
15 Limpiar...................................................... 78
16 Mantenimiento.......................................... 78
17 Reparación................................................79
18 Subsanar las perturbaciones.................... 79
19 Datos técnicos.......................................... 81
20 Combinaciones de espadas y cadenas.... 82
21 Piezas de repuesto y accesorios.............. 82
22 Gestión de residuos.................................. 82
23 Declaración de conformidad UE............... 82
24 Indicaciones de seguridad generales para
herramientas eléctricas.............................83
1 Prólogo
Distinguidos clientes,
Nos alegramos de que se hayan decidido
por STIHL. Desarrollamos y confeccionamos
nuestros productos en primera calidad y con
arreglo a las necesidades de nuestros clientes.
De esta manera conseguimos elaborar produc‐
tos altamente fiables incluso en condiciones de
esfuerzo extremas.
STIHL también presta un Servicio Postventa de
primera calidad. Nuestros comercios especializa‐
dos garantizan un asesoramiento e instrucciones
español
0458-701-9821-G 57
© ANDREAS STIHL AG & Co. KG 2021
0458-701-9821-G. VA0.D21.
Impreso en papel blanqueado sin cloro.
Los colores de la impresión contienen aceites vegetales, por lo que el papel es reciclable.
Traducción del manual de instrucciones original
0000007688_013_E