Instruction Manual

safe handling and control of the tool in unex‐
pected situations.
24.6 Battery tool use and care
a)
Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of
fire when used with another battery pack.
b)
Use power tools only with specifically designa‐
ted battery packs. Use of any other battery
packs may create a risk of injury and fire.
c)
When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi‐
nals together may cause burns or a fire.
d)
Under abusive conditions, liquid may be ejec‐
ted from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irri‐
tation or burns.
e)
Do not use a battery pack or tool that is dam‐
aged or modified. Damaged or modified bat‐
teries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f)
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or
temperature above 130 °C may cause explo‐
sion.
g)
Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc‐
tions. Charging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire.
24.7 Service
a
)
Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
b)
Never service damaged battery packs. Service
of battery packs should only be performed by
the manufacturer or authorized service provid‐
ers.
24.8 Safety instructions for chain
saws
General chain saw safety warnings
a)
Keep all parts of the body away from the saw
chain when the chain saw is operating. Before
you start the chain saw, make sure the saw
chain is not contacting anything. A moment of
inattention while operating chain saws may
cause entanglement of your clothing or body
with the saw chain.
b)
Always hold the chain saw with your right
hand on the rear handle and your left hand on
the front handle. Holding the chain saw with a
reversed hand configuration increases the risk
of personal injury and should never be done.
c)
Hold the chain saw by insulated gripping sur‐
faces only, because the saw chain may con‐
tact hidden wiring or its own cord. Saw chains
contacting a "live" wire may make exposed
metal parts of the chain saw "live" and could
give the operator an electric shock.
d)
Wear eye protection. Further protective equip‐
ment for hearing, head, hands, legs and feet is
recommended. Adequate protective equip‐
ment will reduce personal injury from flying
debris or accidental contact with the saw
chain.
e)
Do not operate a chain saw in a tree, on a lad‐
der, from a rooftop, or any unstable support.
Operation of a chain saw in this manner could
result in serious personal injury.
f)
Always keep proper footing and operate the
chain saw only when standing on fixed, secure
and level surface. Slippery or unstable surfa‐
ces may cause a loss off balance or control of
the chain saw.
g)
When cutting a limb that is under tension, be
alert for spring back. When the tension in the
wood fibres is released, the spring loaded limb
may strike the operator and/or throw the chain
saw out of control.
h)
Use extreme caution when cutting brush and
saplings. The slender material may catch the
saw chain and be whipped toward you or pull
you off balance.
i)
Carry the chain saw by the front handle with
the chain saw switched off and away from
your body. When transporting or storing the
chain saw, always fit the guide bar cover.
Proper handling of the chain saw will reduce
the likelihood of accidental contact with the
moving saw chain.
English 24 General Power Tool Safety Warnings
56 0458-701-9821-G