Instruction Manual

19.4 STIHL AP battery
–
Battery Technology: Lithium-ion
–
Voltage: 36 V
–
Capacity in Ah: see rating label
–
Energy content in Wh: see rating label
–
Weight in kg: see rating label
–
Permissible temperature range for operation
and storage: -10°C to +50°C
19.5 Noise and Vibration Data
K-value for sound pressure level is 2 dB(A). K-
value for sound power level is 2 dB(A). K-value
for vibration level is 2 m/s².
STIHL recommends that you wear hearing pro‐
tection.
MSA 160 C
–
Sound pressure level L
pA
measured according
to EN 60745‑2‑13: 84 dB(A)
–
Sound power level L
wA
measured according to
EN 60745-2-13: 95 dB(A)
–
Vibration level a
hv
measured according to
EN 60745-2-13
•
Control handle: 2.9 m/s²
•
Front handle: 2.7 m/s²
MSA 200 C
–
Sound pressure level L
pA
measured according
to EN 60745‑2‑13: 84 dB(A)
–
Sound power level L
wA
measured according to
EN 60745-2-13: 95 dB(A)
–
Vibration level a
hv
measured according to
EN 60745-2-13
•
Control handle: 3.9 m/s²
•
Front handle: 4.6 m/s²
The vibration values quoted above have been
measured according to a standardized test pro‐
cedure and may be used to compare electric
power tools. Depending on the type of usage,
the vibrations that actually occur may differ from
the values quoted. The vibration values quoted
may be used for an initial assessment of the
user's exposure to vibrations. The actual expo‐
sure to vibrations has to be estimated. This proc‐
ess may also take into account times during
which the electric power tool is switched off and
times during which it is switched on but running
off load.
Information on compliance with Vibration Direc‐
tive 2002/44/EC is available at www.stihl.com/
vib.
19.6 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
20 Bar and Chain Combinations
20.1 STIHL MSA 160 C, MSA 200 C Chainsaws
Pitch Drive link
gauge/groove
width
Length Guide bar Nose spro‐
cket teeth
Number of
drive links
Saw chain
1/4" P 1.1 mm
25 cm
Rollomatic E Mini 8
56
71 PM3 (Type
3670)
30 cm 64
35 cm 72
The cutting length of a guide bar depends on the chainsaw and the saw chain being used. Actual cut‐
ting length may be less than the specified length
21 Spare Parts and Accesso‐
ries
21.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
20 Bar and Chain Combinations English
0458-701-9821-G 53