Instruction Manual
Table Of Contents
- STIHL MSA 160 C, 200 C
- 1 Vorwort
- 2 Informationen zu dieser Gebrauchsanleitung
- 3 Übersicht
- 4 Sicherheitshinweise
- 5 Motorsäge einsatzbereit machen
- 6 Motorsäge zusammenbauen
- 7 Kettenbremse einlegen und lösen
- 8 Akku einsetzen und herausnehmen
- 9 Motorsäge einschalten und ausschalten
- 10 Motorsäge und Akku prüfen
- 11 Mit der Motorsäge arbeiten
- 12 Nach dem Arbeiten
- 13 Transportieren
- 14 Aufbewahren
- 15 Reinigen
- 16 Warten
- 17 Reparieren
- 18 Störungen beheben
- 19 Technische Daten
- 20 Kombinationen der Führungsschienen und Sägeketten
- 21 Ersatzteile und Zubehör
- 22 Entsorgen
- 23 EU-Konformitätserklärung
- 24 Anschriften
- 25 Allgemeine Sicherheitshinweise für Elektrowerkzeuge
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing the Saw for Operation
- 6 Assembling the Saw
- 7 Engaging and Disengaging the Chain Brake
- 8 Removing and Fitting the Battery
- 9 Switching the Saw On/Off
- 10 Testing the Chain Saw and Battery
- 11 Operating the Saw
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Bar and Chain Combinations
- 21 Spare Parts and Accessories
- 22 Disposal
- 23 EC Declaration of Conformity
- 24 General Power Tool Safety Warnings
- 1 Prólogo
- 2 Informaciones relativas a estas instrucciones para la reparación
- 3 Sinopsis
- 4 Indicaciones relativas a la seguridad
- 5 Preparar la motosierra para el trabajo
- 6 Ensamblar la motosierra
- 7 Acoplar y desacoplar el freno de cadena
- 8 Colocar y sacar el acumulador
- 9 Conectar y desconectar la motosierra
- 10 Comprobar la motosierra y el acumulador
- 11 Trabajar con la motosierra
- 12 Después del trabajo
- 13 Transporte
- 14 Almacenamiento
- 15 Limpiar
- 16 Mantenimiento
- 17 Reparación
- 18 Subsanar las perturbaciones
- 19 Datos técnicos
- 20 Combinaciones de espadas y cadenas
- 21 Piezas de repuesto y accesorios
- 22 Gestión de residuos
- 23 Declaración de conformidad UE
- 24 Indicaciones de seguridad generales para herramientas eléctricas
- 24.1 Introducción
- 24.2 Seguridad en el lugar de trabajo
- 24.3 Seguridad eléctrica
- 24.4 Seguridad de personas
- 24.5 Uso y manejo de la herramienta eléctrica
- 24.6 Uso y trato de la herramienta de acumulador
- 24.7 Servicio Técnico
- 24.8 Indicaciones de seguridad para motosierras
- 24.9 Causas del rebote y forma de evitarlo
- 1 Förord
- 2 Information bruksanvisningen
- 3 Översikt
- 4 Säkerhetsanvisningar
- 5 Förbered motorsågen
- 6 Montera motorsågen
- 7 Lägg in och lossa kedjebromsen
- 8 Sätt in och ta ut batteriet
- 9 Sätt på och stäng av motorsågen
- 10 Kontrollera motorsågen och batteriet
- 11 Arbeta med motorsågen
- 12 Efter arbetet
- 13 Transport
- 14 Förvaring
- 15 Rengöring
- 16 Underhåll
- 17 Reparera
- 18 Felavhjälpning
- 19 Tekniska data
- 20 Kombinationer av svärd och sågkedjor
- 21 Reservdelar och tillbehör
- 22 Kassering
- 23 EU-försäkran om överensstämmelse
- 24 Allmänna säkerhetsanvisningar för elverktyg
- 1 Alkusanat
- 2 Tietoja tästä käyttöohjeesta
- 3 Yleiskuva
- 4 Turvallisuusohjeet
- 5 Moottorisahan valmistelu käyttöä varten
- 6 Moottorisahan kokoaminen
- 7 Ketjujarrun kytkeminen ja vapauttaminen
- 8 Akun asentaminen ja irrottaminen
- 9 Moottorisahan käynnistäminen ja pysäyttäminen
- 10 Moottorisahan ja akun tarkastus
- 11 Moottorisahan käyttö
- 12 Työskentelyn jälkeen
- 13 Kuljettaminen
- 14 Säilytys
- 15 Puhdistaminen
- 16 Huoltaminen
- 17 Korjaaminen
- 18 Häiriöiden poistaminen
- 19 Tekniset tiedot
- 20 Terälevyjen ja teräketjujen yhdistelmät
- 21 Varaosat ja varusteet
- 22 Hävittäminen
- 23 EU-vaatimustenmukaisuusvakuutus
- 24 Yleisiä turvallisuusohjeita sähkötyökaluille
- 1 Forord
- 2 Oplysninger om denne brugsvejledning
- 3 Oversigt
- 4 Sikkerhedshenvisninger
- 5 Sådan gøres motorsaven klar
- 6 Samling af motorsaven
- 7 Tilkobling og løsning af kædebremsen
- 8 Isætning og udtagning af batteriet
- 9 Sådan tændes og slukkes motorsaven
- 10 Kontrol af motorsav og batteri
- 11 Arbejde med motorsaven
- 12 Efter arbejdet
- 13 Transport
- 14 Opbevaring
- 15 Rengøring
- 16 Vedligeholdelse
- 17 Reparation
- 18 Afhjælpning af fejl
- 19 Tekniske data
- 20 Kombinationer af sværd og savkæder
- 21 Reservedele og tilbehør
- 22 Bortskaffelse
- 23 EU-overensstemmelseserklæring
- 24 Generelle advarselshenvisninger for el-værktøjer
- 1 Forord
- 2 Informasjon om denne bruksanvisningen
- 3 Oversikt
- 4 Sikkerhetsforskrifter
- 5 Gjøre motorsagen klar til bruk
- 6 Sette sammen motorsagen
- 7 Aktivere og løsne kjedebremsen
- 8 Sette inn og ta ut batteriet
- 9 Slå motorsagen på og av
- 10 Kontrollere motorsag og batteri
- 11 Arbeide med motorsagen
- 12 Etter arbeidet
- 13 Transport
- 14 Oppbevaring
- 15 Rengjøring
- 16 Vedlikeholde
- 17 Reparere
- 18 Utbedre feil
- 19 Tekniske data
- 20 Kombinasjoner av styreskinnene og sagkjeder
- 21 Reservedeler og tilbehør
- 22 Kassering
- 23 EU-samsvarserklæring
- 24 Generelle sikkerhetsanvisninger for elektroverktøy
- 1 Úvod
- 2 Informace k tomuto návodu k použití
- 3 Přehled
- 4 Bezpečnostní pokyny
- 5 Příprava motorové pily k provozu
- 6 Motorovou pilu smontovat.
- 7 Zapnutí a povolení řetězové brzdy
- 8 Vsazení a vyjmutí akumulátoru
- 9 Zapnutí a vypnutí motorové pily
- 10 Kontrola motorové pily a akumulátoru
- 11 Práce s motorovou pilou
- 12 Po skončení práce
- 13 Přeprava
- 14 Skladování
- 15 Čištění
- 16 Údržba
- 17 Oprava
- 18 Odstranění poruch
- 19 Technická data
- 20 Kombinace vodících lišt a pilových řetězů
- 21 Náhradní díly a příslušenství
- 22 Likvidace
- 23 Prohlášení o konformitě EU
- 24 Adresy
- 25 Všeobecné bezpečnostní pokyny pro elektrické stroje
- 1 Előszó
- 2 Erre a használati útmutatóra vonatkozó információk
- 3 Áttekintés
- 4 Biztonsági tudnivalók
- 5 A motorfűrész előkészítése a használatra
- 6 A motorfűrész összeszerelése
- 7 A láncfék behelyezése és kioldása
- 8 Az akku behelyezése és kivevése
- 9 A motorfűrész bekapcsolása és kikapcsolása
- 10 A motorfűrész és az akkumulátor ellenőrzése
- 11 Munkavégzés a motorfűrésszel
- 12 Munka után
- 13 Szállítás
- 14 Tárolás
- 15 Tisztítás
- 16 Karbantartás
- 17 Javítás
- 18 Hibaelhárítás
- 19 Műszaki adatok
- 20 Vezetőlemezek és fűrészláncok kombinációi.
- 21 Pótalkatrészek és tartozékok
- 22 Ártalmatlanítás
- 23 EK Megfelelőségi nyilatkozat
- 24 Általános biztonsági előírások az elektromos szerszámokhoz
- 1 Prefácio
- 2 Informações relativas a este manual de instruções
- 3 Vista geral
- 4 Indicações de segurança
- 4.1 Símbolos de aviso
- 4.2 Utilização prevista
- 4.3 Requisitos dos utilizadores
- 4.4 Vestuário e equipamento
- 4.5 Zona de trabalho e meio circundante
- 4.6 Estado de acordo com as exigências de segurança
- 4.7 Trabalho
- 4.8 Forças de reacção
- 4.9 Transporte
- 4.10 Armazenamento
- 4.11 Limpeza, manutenção e reparaçãoLimpeza, manutenção e reparação
- 5 Tornar a motosserra operacional
- 6 Montagem da motosserra
- 7 Inserir e soltar o travão da corrente
- 8 Colocação e remoção da bateria
- 9 Ligação e desconexão da motosserra
- 10 Verificar a motosserra e a bateria
- 11 Trabalhar com a motosserra
- 12 Após o trabalho
- 13 Transporte
- 14 Armazenamento
- 15 Limpeza
- 16 Fazer a manutenção
- 17 Reparar
- 18 Eliminação de avarias
- 19 Dados técnicos
- 20 Combinações de guias e correntes
- 21 Peças de reposição e acessórios
- 22 Eliminar
- 23 Declaração de conformidade CE
- 24 Indicações de segurança gerais para ferramentas eléctricas
- 24.1 Introdução
- 24.2 Segurança no local de trabalho
- 24.3 Segurança elétrica
- 24.4 Segurança de pessoas
- 24.5 Utilização e manuseamento da ferramenta elétrica
- 24.6 Utilização e manuseamento da ferramenta a bateria
- 24.7 Serviço de assistência técnica
- 24.8 Indicações de segurança para serras de corrente
- 24.9 Causas para um rebate e como evitá-lo
- 1 Предисловие
- 2 Информация к данному руководству по эксплуатации
- 3 Обзор
- 4 Указания по технике безопасности
- 5 Подготовка мотопилы к эксплуатации
- 6 Сбор мотопилы
- 7 Установка и отпускание цепного тормоза
- 8 Установка и извлечение аккумулятора
- 9 Включение и выключение мотопилы
- 10 Проверка мотопилы и аккумулятора
- 11 Работа мотопилой
- 12 После работы
- 13 Транспортировка
- 14 Хранение
- 15 Очистка
- 16 Техническое обслуживание
- 17 Ремонт
- 18 Устранение неисправностей
- 19 Технические данные
- 20 Комбинации направляющей шины и пильной цепи
- 21 Запасные части и принадлежности
- 22 Утилизация
- 23 Сертификат соответствия ЕС
- 24 Адреса
- 25 Общие указания по технике безопасности для электроинструментов
- 25.1 Введение
- 25.2 Безопасность на рабочем месте
- 25.3 Электробезопасность
- 25.4 Безопасность людей
- 25.5 Применение и обращение с электроинструментом
- 25.6 Применение и обращение с аккумуляторным инструментом
- 25.7 Техническое обслуживание
- 25.8 Указания по технике безопасности при пилении цепной пилой
- 25.9 Причины и предотвращение обратной отдачи
- 1 Przedmowa
- 2 Informacje o instrukcji użytkowania
- 3 Przegląd
- 4 Wskazówki dotyczące bezpieczeństwa pracy
- 5 Przygotowanie pilarki do pracy
- 6 Składanie pilarki
- 7 Zakładanie i luzowanie hamulca piły łańcuchowej
- 8 Podłączanie i odłączanie akumulatora
- 9 Włączanie i wyłączanie pilarki
- 10 Kontrola pilarki i akumulatora
- 11 Praca z pilarką
- 12 Po zakończeniu pracy
- 13 Transport
- 14 Przechowywanie
- 15 Czyszczenie
- 16 Konserwacja
- 17 Naprawa
- 18 Rozwiązywanie problemów
- 19 Dane techniczne
- 20 Kombinacje prowadnicy i piły łańcuchowej
- 21 Części zamienne i akcesoria
- 22 Utylizacja
- 23 Deklaracja zgodności UE
- 24 Ogólne wskazówki bezpieczeństwa obowiązujące podczas pracy narzędziami z napędem elektrycznym
- 24.1 Wprowadzenie
- 24.2 Bezpieczeństwo na stanowisku pracy
- 24.3 Bezpieczeństwo elektryczne
- 24.4 Bezpieczeństwo ludzi
- 24.5 Używanie elektronarzędzia
- 24.6 Stosowanie i obchodzenie się z narzędziem akumulatorowym
- 24.7 Serwis
- 24.8 Zasady bezpieczeństwa dotyczące pilarek łańcuchowych
- 24.9 Przyczyny oraz sposób uniknięcia odrzucenia wstecznego
- 1 Предговор
- 2 Информация относно настоящото Ръководството за употреба
- 3 Преглед на съдържанието
- 4 Указания за безопасност
- 4.1 Предупредителни символи
- 4.2 Употреба по предназначение
- 4.3 Изисквания към ползвателя
- 4.4 Облекло и екипировка
- 4.5 Работен участък и неговата околност
- 4.6 Състояние, съответстващо на изискванията за безопасност
- 4.7 Процес на работа
- 4.8 Реактивни сили
- 4.9 Транспортиране
- 4.10 Съхранение
- 4.11 Почистване, поддръжка и ремонт
- 5 Подготовка на моторния трион за работа
- 6 Сглобете моторния трион
- 7 Задействане и освобождаване на верижната спирачка
- 8 Поставяне и изваждане на акумулатора
- 9 Включване и изключване на моторния трион
- 10 Проверка на моторния трион и акумулаторната батерия
- 11 Работа с моторния трион
- 12 След работа
- 13 Транспортиране
- 14 Съхранение
- 15 Почистване
- 16 Поддръжка /обслужване
- 17 Ремонт
- 18 Отстраняване на неизправности
- 19 Технически данни
- 20 Комбинации от направляваща шина и режеща верига
- 21 Резервни части и принадлежности
- 22 Отстраняване /изхвърляне
- 23 Декларация на ЕС (EU) за съответствие
- 24 Общи указания за безопасност за електрически инструменти
- 24.1 Въведение
- 24.2 Безопасност на работното място
- 24.3 Електрическа безопасност
- 24.4 Безопасност на хора
- 24.5 Използване и боравене с електрическия инструмент
- 24.6 Използване и третиране на акумулаторния инструмент
- 24.7 Сервиз
- 24.8 Указания за безопасност за верижни моторни триони
- 24.9 Причини за обратен удар и начини за избягването му
- 1 Prefaţă
- 2 Informaţii referitoare la acest Manual de instrucţiuni
- 3 Cuprins
- 4 Instrucţiuni de siguranţă
- 5 Pregătirea pentru utilizare a motoferăstrăului
- 6 Asamblarea motoferăstrăului
- 7 Punerea şi slăbirea frânei de lanţ
- 8 Introducerea şi scoaterea bateriei
- 9 Pornirea şi oprirea motoferăstrăului
- 10 Verificarea motoferăstrăului şi al acumulatorului
- 11 Lucrul cu motoferăstrăul
- 12 După lucru
- 13 Transportarea
- 14 Stocarea
- 15 Curăţare
- 16 Întreţinere
- 17 Reparare
- 18 Depanare
- 19 Date tehnice
- 20 Combinaţii ale şinei portlanţ şi lanţului de ferăstrău
- 21 Piese de schimb şi accesorii
- 22 Eliminare
- 23 Declaraţie de conformitate EU
- 24 Instrucţiuni generale de siguranţă pentru electrounelte
- 24.1 Introducere
- 24.2 Siguranţa la locul de muncă
- 24.3 Siguranţa electrică
- 24.4 Siguranţa persoanelor
- 24.5 Manipularea şi utilizarea uneltei electrice
- 24.6 Manipularea şi utilizarea uneltei cu acumulator
- 24.7 Service
- 24.8 Instrucţiuni de siguranţă pentru fierăstraiele cu lanţ
- 24.9 Cauzele şi evitarea unui recul
► Attach accessories as described in this
User Manual or in the User Manual for the
accessories.
►
Never insert objects in the chainsaw’s
openings.
► Close the oil tank cap.
► Replace worn or damaged labels.
► If you have any doubts, be sure to consult a
STIHL dealer.
4.6.2 Guide Bar
The guide bar is in a safe condition if the follow‐
ing points are observed:
–
Guide bar is not damaged.
–
Guide bar is not deformed.
–
The minimum groove depth is maintained,
19.3.
–
Bar rails are free from burrs.
–
Bar groove is not pinched or splayed.
WARNING
■ If the guide bar is not in a safe condition, it can
no longer support and guide the saw chain
properly. The rotating saw chain can jump off
the guide bar. This can result in serious or
fatal injuries.
►
Work only with an undamaged guide bar.
► If the groove depth is less than the mini‐
mum depth: Mount a new guide bar.
► Deburr the guide bar every week.
► If you have any queries: Contact your
STIHL servicing dealer.
4.6.3 Saw Chain
The saw chain is in a safe condition if the follow‐
ing points are observed:
–
Chain is not damaged.
–
Chain is properly sharpened.
–
The service marks on the cutters are still visi‐
ble.
WARNING
■
If components do not comply with safety
requirements, they will no longer function
properly and safety devices may be rendered
inoperative. This can result in serious or fatal
injuries.
►
Work only with an undamaged saw chain.
► Sharpen the chain properly.
► If you have any queries: Contact your
STIHL servicing dealer for assistance.
4.6.4 Battery
The battery is in safe condition when the follow‐
ing conditions are met:
–
The battery is not damaged.
–
The battery is clean and dry.
–
The battery is working and has not been modi‐
fied.
WARNING
■
The battery cannot function safely if it is not in
safe condition. There is a risk of serious injury
to persons.
►
Use an undamaged and functioning battery.
► Do not charge a damaged or defective bat‐
tery.
► If the battery is dirty or wet: clean the bat‐
tery and allow it to dry.
► Do not modify the battery.
► Do not insert objects into the apertures in
the battery.
► Never connect the battery terminals to met‐
allic objects and cause a short circuit.
► Do not open the battery.
► Replace worn or damaged warning signs.
■ Fluid may leak from a damaged battery. If the
fluid contacts the skin or eyes, this may cause
irritation.
►
Avoid contact with the fluid.
► In the event of contact with the skin: wash
the affected areas with plenty of soap and
water.
►
In the event of contact with the eyes: rinse
the eyes with plenty of water for at least 15
minutes and seek medical attention.
■
A damaged or defective battery may emit an
unusual odour, smoke or catch fire. This may
result in serious or fatal injury to people and
damage to property.
►
If the battery emits an unusual odour or
smoke: do not use the battery and keep it
away from flammable materials.
►
If the battery catches fire: try to extinguish
the battery using a fire extinguisher or
water.
4.7 Working
4.7.1 Cutting
WARNING
■
Always work within calling distance of others
in case help is needed.
► Make sure than persons outside the work
area are within calling distance.
■ The user cannot concentrate on the work in
certain situations. The user can lose control of
the saw, stumble or fall and be seriously
injured.
►
Work calmly and carefully.
► If light and visibility are poor: Do not use
your saw.
English 4 Safety Precautions
36 0458-701-9821-G