Instruction Manual
Table Of Contents
- STIHL MSA 160 C, 200 C
- 1 Vorwort
- 2 Informationen zu dieser Gebrauchsanleitung
- 3 Übersicht
- 4 Sicherheitshinweise
- 5 Motorsäge einsatzbereit machen
- 6 Motorsäge zusammenbauen
- 7 Kettenbremse einlegen und lösen
- 8 Akku einsetzen und herausnehmen
- 9 Motorsäge einschalten und ausschalten
- 10 Motorsäge und Akku prüfen
- 11 Mit der Motorsäge arbeiten
- 12 Nach dem Arbeiten
- 13 Transportieren
- 14 Aufbewahren
- 15 Reinigen
- 16 Warten
- 17 Reparieren
- 18 Störungen beheben
- 19 Technische Daten
- 20 Kombinationen der Führungsschienen und Sägeketten
- 21 Ersatzteile und Zubehör
- 22 Entsorgen
- 23 EU-Konformitätserklärung
- 24 Anschriften
- 25 Allgemeine Sicherheitshinweise für Elektrowerkzeuge
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing the Saw for Operation
- 6 Assembling the Saw
- 7 Engaging and Disengaging the Chain Brake
- 8 Removing and Fitting the Battery
- 9 Switching the Saw On/Off
- 10 Testing the Chain Saw and Battery
- 11 Operating the Saw
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Bar and Chain Combinations
- 21 Spare Parts and Accessories
- 22 Disposal
- 23 EC Declaration of Conformity
- 24 General Power Tool Safety Warnings
- 1 Prólogo
- 2 Informaciones relativas a estas instrucciones para la reparación
- 3 Sinopsis
- 4 Indicaciones relativas a la seguridad
- 5 Preparar la motosierra para el trabajo
- 6 Ensamblar la motosierra
- 7 Acoplar y desacoplar el freno de cadena
- 8 Colocar y sacar el acumulador
- 9 Conectar y desconectar la motosierra
- 10 Comprobar la motosierra y el acumulador
- 11 Trabajar con la motosierra
- 12 Después del trabajo
- 13 Transporte
- 14 Almacenamiento
- 15 Limpiar
- 16 Mantenimiento
- 17 Reparación
- 18 Subsanar las perturbaciones
- 19 Datos técnicos
- 20 Combinaciones de espadas y cadenas
- 21 Piezas de repuesto y accesorios
- 22 Gestión de residuos
- 23 Declaración de conformidad UE
- 24 Indicaciones de seguridad generales para herramientas eléctricas
- 24.1 Introducción
- 24.2 Seguridad en el lugar de trabajo
- 24.3 Seguridad eléctrica
- 24.4 Seguridad de personas
- 24.5 Uso y manejo de la herramienta eléctrica
- 24.6 Uso y trato de la herramienta de acumulador
- 24.7 Servicio Técnico
- 24.8 Indicaciones de seguridad para motosierras
- 24.9 Causas del rebote y forma de evitarlo
- 1 Förord
- 2 Information bruksanvisningen
- 3 Översikt
- 4 Säkerhetsanvisningar
- 5 Förbered motorsågen
- 6 Montera motorsågen
- 7 Lägg in och lossa kedjebromsen
- 8 Sätt in och ta ut batteriet
- 9 Sätt på och stäng av motorsågen
- 10 Kontrollera motorsågen och batteriet
- 11 Arbeta med motorsågen
- 12 Efter arbetet
- 13 Transport
- 14 Förvaring
- 15 Rengöring
- 16 Underhåll
- 17 Reparera
- 18 Felavhjälpning
- 19 Tekniska data
- 20 Kombinationer av svärd och sågkedjor
- 21 Reservdelar och tillbehör
- 22 Kassering
- 23 EU-försäkran om överensstämmelse
- 24 Allmänna säkerhetsanvisningar för elverktyg
- 1 Alkusanat
- 2 Tietoja tästä käyttöohjeesta
- 3 Yleiskuva
- 4 Turvallisuusohjeet
- 5 Moottorisahan valmistelu käyttöä varten
- 6 Moottorisahan kokoaminen
- 7 Ketjujarrun kytkeminen ja vapauttaminen
- 8 Akun asentaminen ja irrottaminen
- 9 Moottorisahan käynnistäminen ja pysäyttäminen
- 10 Moottorisahan ja akun tarkastus
- 11 Moottorisahan käyttö
- 12 Työskentelyn jälkeen
- 13 Kuljettaminen
- 14 Säilytys
- 15 Puhdistaminen
- 16 Huoltaminen
- 17 Korjaaminen
- 18 Häiriöiden poistaminen
- 19 Tekniset tiedot
- 20 Terälevyjen ja teräketjujen yhdistelmät
- 21 Varaosat ja varusteet
- 22 Hävittäminen
- 23 EU-vaatimustenmukaisuusvakuutus
- 24 Yleisiä turvallisuusohjeita sähkötyökaluille
- 1 Forord
- 2 Oplysninger om denne brugsvejledning
- 3 Oversigt
- 4 Sikkerhedshenvisninger
- 5 Sådan gøres motorsaven klar
- 6 Samling af motorsaven
- 7 Tilkobling og løsning af kædebremsen
- 8 Isætning og udtagning af batteriet
- 9 Sådan tændes og slukkes motorsaven
- 10 Kontrol af motorsav og batteri
- 11 Arbejde med motorsaven
- 12 Efter arbejdet
- 13 Transport
- 14 Opbevaring
- 15 Rengøring
- 16 Vedligeholdelse
- 17 Reparation
- 18 Afhjælpning af fejl
- 19 Tekniske data
- 20 Kombinationer af sværd og savkæder
- 21 Reservedele og tilbehør
- 22 Bortskaffelse
- 23 EU-overensstemmelseserklæring
- 24 Generelle advarselshenvisninger for el-værktøjer
- 1 Forord
- 2 Informasjon om denne bruksanvisningen
- 3 Oversikt
- 4 Sikkerhetsforskrifter
- 5 Gjøre motorsagen klar til bruk
- 6 Sette sammen motorsagen
- 7 Aktivere og løsne kjedebremsen
- 8 Sette inn og ta ut batteriet
- 9 Slå motorsagen på og av
- 10 Kontrollere motorsag og batteri
- 11 Arbeide med motorsagen
- 12 Etter arbeidet
- 13 Transport
- 14 Oppbevaring
- 15 Rengjøring
- 16 Vedlikeholde
- 17 Reparere
- 18 Utbedre feil
- 19 Tekniske data
- 20 Kombinasjoner av styreskinnene og sagkjeder
- 21 Reservedeler og tilbehør
- 22 Kassering
- 23 EU-samsvarserklæring
- 24 Generelle sikkerhetsanvisninger for elektroverktøy
- 1 Úvod
- 2 Informace k tomuto návodu k použití
- 3 Přehled
- 4 Bezpečnostní pokyny
- 5 Příprava motorové pily k provozu
- 6 Motorovou pilu smontovat.
- 7 Zapnutí a povolení řetězové brzdy
- 8 Vsazení a vyjmutí akumulátoru
- 9 Zapnutí a vypnutí motorové pily
- 10 Kontrola motorové pily a akumulátoru
- 11 Práce s motorovou pilou
- 12 Po skončení práce
- 13 Přeprava
- 14 Skladování
- 15 Čištění
- 16 Údržba
- 17 Oprava
- 18 Odstranění poruch
- 19 Technická data
- 20 Kombinace vodících lišt a pilových řetězů
- 21 Náhradní díly a příslušenství
- 22 Likvidace
- 23 Prohlášení o konformitě EU
- 24 Adresy
- 25 Všeobecné bezpečnostní pokyny pro elektrické stroje
- 1 Előszó
- 2 Erre a használati útmutatóra vonatkozó információk
- 3 Áttekintés
- 4 Biztonsági tudnivalók
- 5 A motorfűrész előkészítése a használatra
- 6 A motorfűrész összeszerelése
- 7 A láncfék behelyezése és kioldása
- 8 Az akku behelyezése és kivevése
- 9 A motorfűrész bekapcsolása és kikapcsolása
- 10 A motorfűrész és az akkumulátor ellenőrzése
- 11 Munkavégzés a motorfűrésszel
- 12 Munka után
- 13 Szállítás
- 14 Tárolás
- 15 Tisztítás
- 16 Karbantartás
- 17 Javítás
- 18 Hibaelhárítás
- 19 Műszaki adatok
- 20 Vezetőlemezek és fűrészláncok kombinációi.
- 21 Pótalkatrészek és tartozékok
- 22 Ártalmatlanítás
- 23 EK Megfelelőségi nyilatkozat
- 24 Általános biztonsági előírások az elektromos szerszámokhoz
- 1 Prefácio
- 2 Informações relativas a este manual de instruções
- 3 Vista geral
- 4 Indicações de segurança
- 4.1 Símbolos de aviso
- 4.2 Utilização prevista
- 4.3 Requisitos dos utilizadores
- 4.4 Vestuário e equipamento
- 4.5 Zona de trabalho e meio circundante
- 4.6 Estado de acordo com as exigências de segurança
- 4.7 Trabalho
- 4.8 Forças de reacção
- 4.9 Transporte
- 4.10 Armazenamento
- 4.11 Limpeza, manutenção e reparaçãoLimpeza, manutenção e reparação
- 5 Tornar a motosserra operacional
- 6 Montagem da motosserra
- 7 Inserir e soltar o travão da corrente
- 8 Colocação e remoção da bateria
- 9 Ligação e desconexão da motosserra
- 10 Verificar a motosserra e a bateria
- 11 Trabalhar com a motosserra
- 12 Após o trabalho
- 13 Transporte
- 14 Armazenamento
- 15 Limpeza
- 16 Fazer a manutenção
- 17 Reparar
- 18 Eliminação de avarias
- 19 Dados técnicos
- 20 Combinações de guias e correntes
- 21 Peças de reposição e acessórios
- 22 Eliminar
- 23 Declaração de conformidade CE
- 24 Indicações de segurança gerais para ferramentas eléctricas
- 24.1 Introdução
- 24.2 Segurança no local de trabalho
- 24.3 Segurança elétrica
- 24.4 Segurança de pessoas
- 24.5 Utilização e manuseamento da ferramenta elétrica
- 24.6 Utilização e manuseamento da ferramenta a bateria
- 24.7 Serviço de assistência técnica
- 24.8 Indicações de segurança para serras de corrente
- 24.9 Causas para um rebate e como evitá-lo
- 1 Предисловие
- 2 Информация к данному руководству по эксплуатации
- 3 Обзор
- 4 Указания по технике безопасности
- 5 Подготовка мотопилы к эксплуатации
- 6 Сбор мотопилы
- 7 Установка и отпускание цепного тормоза
- 8 Установка и извлечение аккумулятора
- 9 Включение и выключение мотопилы
- 10 Проверка мотопилы и аккумулятора
- 11 Работа мотопилой
- 12 После работы
- 13 Транспортировка
- 14 Хранение
- 15 Очистка
- 16 Техническое обслуживание
- 17 Ремонт
- 18 Устранение неисправностей
- 19 Технические данные
- 20 Комбинации направляющей шины и пильной цепи
- 21 Запасные части и принадлежности
- 22 Утилизация
- 23 Сертификат соответствия ЕС
- 24 Адреса
- 25 Общие указания по технике безопасности для электроинструментов
- 25.1 Введение
- 25.2 Безопасность на рабочем месте
- 25.3 Электробезопасность
- 25.4 Безопасность людей
- 25.5 Применение и обращение с электроинструментом
- 25.6 Применение и обращение с аккумуляторным инструментом
- 25.7 Техническое обслуживание
- 25.8 Указания по технике безопасности при пилении цепной пилой
- 25.9 Причины и предотвращение обратной отдачи
- 1 Przedmowa
- 2 Informacje o instrukcji użytkowania
- 3 Przegląd
- 4 Wskazówki dotyczące bezpieczeństwa pracy
- 5 Przygotowanie pilarki do pracy
- 6 Składanie pilarki
- 7 Zakładanie i luzowanie hamulca piły łańcuchowej
- 8 Podłączanie i odłączanie akumulatora
- 9 Włączanie i wyłączanie pilarki
- 10 Kontrola pilarki i akumulatora
- 11 Praca z pilarką
- 12 Po zakończeniu pracy
- 13 Transport
- 14 Przechowywanie
- 15 Czyszczenie
- 16 Konserwacja
- 17 Naprawa
- 18 Rozwiązywanie problemów
- 19 Dane techniczne
- 20 Kombinacje prowadnicy i piły łańcuchowej
- 21 Części zamienne i akcesoria
- 22 Utylizacja
- 23 Deklaracja zgodności UE
- 24 Ogólne wskazówki bezpieczeństwa obowiązujące podczas pracy narzędziami z napędem elektrycznym
- 24.1 Wprowadzenie
- 24.2 Bezpieczeństwo na stanowisku pracy
- 24.3 Bezpieczeństwo elektryczne
- 24.4 Bezpieczeństwo ludzi
- 24.5 Używanie elektronarzędzia
- 24.6 Stosowanie i obchodzenie się z narzędziem akumulatorowym
- 24.7 Serwis
- 24.8 Zasady bezpieczeństwa dotyczące pilarek łańcuchowych
- 24.9 Przyczyny oraz sposób uniknięcia odrzucenia wstecznego
- 1 Предговор
- 2 Информация относно настоящото Ръководството за употреба
- 3 Преглед на съдържанието
- 4 Указания за безопасност
- 4.1 Предупредителни символи
- 4.2 Употреба по предназначение
- 4.3 Изисквания към ползвателя
- 4.4 Облекло и екипировка
- 4.5 Работен участък и неговата околност
- 4.6 Състояние, съответстващо на изискванията за безопасност
- 4.7 Процес на работа
- 4.8 Реактивни сили
- 4.9 Транспортиране
- 4.10 Съхранение
- 4.11 Почистване, поддръжка и ремонт
- 5 Подготовка на моторния трион за работа
- 6 Сглобете моторния трион
- 7 Задействане и освобождаване на верижната спирачка
- 8 Поставяне и изваждане на акумулатора
- 9 Включване и изключване на моторния трион
- 10 Проверка на моторния трион и акумулаторната батерия
- 11 Работа с моторния трион
- 12 След работа
- 13 Транспортиране
- 14 Съхранение
- 15 Почистване
- 16 Поддръжка /обслужване
- 17 Ремонт
- 18 Отстраняване на неизправности
- 19 Технически данни
- 20 Комбинации от направляваща шина и режеща верига
- 21 Резервни части и принадлежности
- 22 Отстраняване /изхвърляне
- 23 Декларация на ЕС (EU) за съответствие
- 24 Общи указания за безопасност за електрически инструменти
- 24.1 Въведение
- 24.2 Безопасност на работното място
- 24.3 Електрическа безопасност
- 24.4 Безопасност на хора
- 24.5 Използване и боравене с електрическия инструмент
- 24.6 Използване и третиране на акумулаторния инструмент
- 24.7 Сервиз
- 24.8 Указания за безопасност за верижни моторни триони
- 24.9 Причини за обратен удар и начини за избягването му
- 1 Prefaţă
- 2 Informaţii referitoare la acest Manual de instrucţiuni
- 3 Cuprins
- 4 Instrucţiuni de siguranţă
- 5 Pregătirea pentru utilizare a motoferăstrăului
- 6 Asamblarea motoferăstrăului
- 7 Punerea şi slăbirea frânei de lanţ
- 8 Introducerea şi scoaterea bateriei
- 9 Pornirea şi oprirea motoferăstrăului
- 10 Verificarea motoferăstrăului şi al acumulatorului
- 11 Lucrul cu motoferăstrăul
- 12 După lucru
- 13 Transportarea
- 14 Stocarea
- 15 Curăţare
- 16 Întreţinere
- 17 Reparare
- 18 Depanare
- 19 Date tehnice
- 20 Combinaţii ale şinei portlanţ şi lanţului de ferăstrău
- 21 Piese de schimb şi accesorii
- 22 Eliminare
- 23 Declaraţie de conformitate EU
- 24 Instrucţiuni generale de siguranţă pentru electrounelte
- 24.1 Introducere
- 24.2 Siguranţa la locul de muncă
- 24.3 Siguranţa electrică
- 24.4 Siguranţa persoanelor
- 24.5 Manipularea şi utilizarea uneltei electrice
- 24.6 Manipularea şi utilizarea uneltei cu acumulator
- 24.7 Service
- 24.8 Instrucţiuni de siguranţă pentru fierăstraiele cu lanţ
- 24.9 Cauzele şi evitarea unui recul
The chainsaw is powered by a STIHL AP battery
or a STIHL AR battery.
If it is necessary to work on a safe raised plat‐
form, the chainsaw may be used only with a
STIHL AP battery inserted directly in the saw.
WARNING
■ Batteries not explicitly approved for the chain‐
saw by STIHL may cause a fire or explosion.
This can result in serious or fatal injuries and
damage to property.
►
Use the chainsaw with a STIHL AP battery
or a STIHL AR battery.
■ Using the chainsaw or the battery for purposes
for which they were not intended may result in
serious or fatal injuries and damage to prop‐
erty.
►
Use the chainsaw as described in this
instruction manual.
► Use the battery as described in this instruc‐
tion manual or the instruction manual for
the STIHL AR battery.
4.3 The Operator
WARNING
■ Users without adequate training or instruction
cannot recognize or assess the risks involved
in using the chainsaw and battery. The user or
other persons may sustain serious or fatal
injuries.
► Read, understand and save the
instruction manual.
► If the chainsaw or battery is passed on to
another person: Always give them the
instruction manual.
►
Make sure the user meets the following
requirements:
–
The user must be rested.
–
The user must be in good physical con‐
dition and mental health to operate and
work with the chainsaw and battery. If
the user’s physical, sensory or mental
ability is restricted, he or she may work
only under the supervision of or as
instructed by a responsible person.
–
The user is able to recognize and
assess the risks involved in using the
chainsaw and battery.
–
The user must be of legal age or is
being trained in a trade under supervi‐
sion in accordance with national rules
and regulations.
–
The user has received instruction from a
STIHL servicing dealer or other experi‐
enced user before working with the
chainsaw for the first time.
–
The user must not be under the influ‐
ence of alcohol, medication or drugs.
►
If the user is working with a chainsaw for
the first time: Practice cutting logs on a
sawhorse or other support.
►
If you have any queries: Contact a STIHL
servicing dealer for assistance.
4.4 Clothing and equipment
WARNING
■ Long hair may be pulled into the chainsaw
while working. This may result in serious injury
to the user.
►
Tie up and confine long hair above your
shoulders.
■ Objects can be thrown at high speed during
operation. This may result in injury to the user.
► Wear close-fitting safety glasses.
Suitable safety glasses are tested in
accordance with EN 166 or national
regulations and available commer‐
cially with the corresponding mark‐
ing.
►
STIHL recommends wearing a face mask.
► Wear a long-sleeved, close fitting top.
■ Falling objects can cause head injuries.
► If objects are likely to fall while work‐
ing: wear a hard hat.
■ Dust can be whipped up during operation:
Whipped up dust can damage the respiratory
passages and cause allergic reactions.
►
If dust is whipped up or forms a cloud:
Wear a dust respirator mask.
■ Unsuitable clothing can snag on wood or
scrub and may become caught in the chain
saw. Users not wearing suitable clothing are at
risk of serious injury.
►
Wear close-fitting clothing.
► Remove scarves and jewelry.
■ The user may come into contact with the mov‐
ing saw chain while working. This may result
in serious injury to the user.
►
Wear long trousers with cut protection.
■ The user may cut himself or herself on wood
while working. The user may come into con‐
tact with the saw chain during cleaning or
servicing. This may result in injury to the user.
►
Wear work gloves made from resistant
material.
English 4 Safety Precautions
34 0458-701-9821-G