Instruction Manual
Table Of Contents
- STIHL MSA 161 T
- 1 Vorwort
- 2 Informationen zu dieser Gebrauchsanleitung
- 3 Übersicht
- 4 Sicherheitshinweise
- 5 Motorsäge einsatzbereit machen
- 6 Motorsäge zusammenbauen
- 7 Kettenbremse einlegen und lösen
- 8 Akku einsetzen und herausnehmen
- 9 Motorsäge einschalten und ausschalten
- 10 Motorsäge und Akku prüfen
- 11 Mit der Motorsäge arbeiten
- 12 Nach dem Arbeiten
- 13 Transportieren
- 14 Aufbewahren
- 15 Reinigen
- 16 Warten
- 17 Reparieren
- 18 Störungen beheben
- 19 Technische Daten
- 20 Kombinationen der Führungsschienen und Sägeketten
- 21 Ersatzteile und Zubehör
- 22 Entsorgen
- 23 EU-Konformitätserklärung
- 24 Anschriften
- 25 Allgemeine Sicherheitshinweise für Elektrowerkzeuge
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing the Saw for Operation
- 6 Assembling the Saw
- 7 Engaging and Disengaging the Chain Brake
- 8 Removing and Fitting the Battery
- 9 Switching the Saw On/Off
- 10 Testing the Chain Saw and Battery
- 11 Operating the Saw
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Bar and Chain Combinations
- 21 Spare Parts and Accessories
- 22 Disposal
- 23 EC Declaration of Conformity
- 24 General Power Tool Safety Warnings
- 1 Préface
- 2 Informations concernant la présente Notice d'emploi
- 3 Vue d'ensemble
- 4 Prescriptions de sécurité
- 4.1 Symboles d'avertissement
- 4.2 Utilisation conforme à la destination prévue
- 4.3 Exigences posées à l'utilisateur
- 4.4 Vêtements et équipement
- 4.5 Aire de travail et voisinage
- 4.6 Bon état pour une utilisation en toute sécurité
- 4.7 Utilisation
- 4.8 Forces de réaction
- 4.9 Transport
- 4.10 Rangement
- 4.11 Nettoyage, entretien et réparation
- 5 Préparatifs avant l'utilisation de la tronçonneuse
- 6 Assemblage de la tronçonneuse
- 7 Serrage et desserrage du frein de chaîne
- 8 Introduction et extraction de la batterie
- 9 Mise en marche et arrêt de la tronçonneuse
- 10 Contrôle de la tronçonneuse et de la batterie
- 11 Travail avec la tronçonneuse
- 12 Après le travail
- 13 Transport
- 14 Rangement
- 15 Nettoyage
- 16 Maintenance
- 17 Réparation
- 18 Dépannage
- 19 Caractéristiques techniques
- 20 Combinaisons de guide-chaînes et de chaînes de tronçonneuse
- 21 Pièces de rechange et accessoires
- 22 Mise au rebut
- 23 Déclaration de conformité UE
- 24 Indications générales de sécurité pour outils électroportatifs
- 1 Premessa
- 2 Informazioni sulle presenti Istruzioni d’uso
- 3 Sommario
- 4 Avvertenze di sicurezza
- 5 Preparare la motosega per l'esercizio
- 6 Assemblaggio della motosega
- 7 Inserire e sbloccare il freno catena
- 8 Inserire e togliere la batteria
- 9 Accendere e spegnere la motosega
- 10 Controllo di motosega e batteria
- 11 Lavorare con la motosega
- 12 Dopo il lavoro
- 13 Trasporto
- 14 Conservazione
- 15 Pulizia
- 16 Manutenzione
- 17 Riparazione
- 18 Eliminazione dei guasti
- 19 Dati tecnici
- 20 Combinazioni di spranghe di guida e catene della sega
- 21 Ricambi e accessori
- 22 Smaltimento
- 23 Dichiarazione di conformità UE
- 24 Avvertenze di sicurezza generali per attrezzi elettrici
- 1 Voorwoord
- 2 Informatie met betrekking tot deze handleiding
- 3 Overzicht
- 4 Veiligheidsinstructies
- 5 Motorzaag klaarmaken voor gebruik
- 6 Motorzaag completeren
- 7 Kettingrem inschakelen en lossen
- 8 Accu aanbrengen en wegnemen
- 9 Motorzaag inschakelen en uitschakelen
- 10 Kettingzaag en accu controleren
- 11 Met de motorzaag werken
- 12 Na de werkzaamheden
- 13 Vervoeren
- 14 Opslaan
- 15 Reinigen
- 16 Onderhoud
- 17 Repareren
- 18 Storingen opheffen
- 19 Technische gegevens
- 20 Combinaties van zaagbladen en zaagkettingen
- 21 Onderdelen en toebehoren
- 22 Milieuverantwoord afvoeren
- 23 EU-conformiteitsverklaring
- 24 Algemene veiligheidswaarschuwingen voor elektrische gereedschappen
1
2
0000-GXX-6242-A0
► Push the battery (1) into the battery compart‐
ment (2) as far as stop.
The battery (1) engages with a click and is
now locked.
8.2 Removing the Battery
► Stand the saw on a level surface.
2
1
1
0000-GXX-6243-A0
► Depress both locking levers (1).
The battery (2) is unlocked and can be
removed.
9 Switching the Saw On/Off
9.1 Switching on the chainsaw
► Hold the chain saw by the control handle with
your right hand, wrapping your thumb around
the control handle.
► Disengage the chain brake.
► Hold the chain saw by the handlebar with your
left hand, wrapping your thumb around the
handlebar.
1
32
0000-GXX-6244-A0
► Press and hold the lockout button (2) with your
thumb.
► Press the trigger (3) with your index finger and
keep depressed.
The chain saw accelerates and the chain
starts moving. Release the locking button (2).
The more you depress the trigger (3), the faster
the saw chain runs.
If the ergo lever (1) is pressed, the trigger switch
(3) remains unlocked. This means the trigger can
be released and depressed again without having
to press the locking button again.
If the trigger switch (3) and the ergo lever (1) are
released, the trigger switch (3) is locked. The
locking button (2) must be pressed and held
again to unlock the trigger (3).
9.2 Switching Off
► Release the trigger.
The chain stops rotating.
► If the chain continues to rotate: Engage the
chain brake, remove the battery and contact
your STIHL servicing dealer for assistance.
The saw has a malfunction.
10 Testing the Chain Saw and
Battery
10.1 Checking the Chain Sprocket
► Switch off the chain saw, engage the chain
brake and remove the battery.
► Disengage the chain brake.
► Remove the chain sprocket cover.
► Remove the bar and chain.
a
0000-GXX-1216-A0
► Use a STIHL gauge to check the wear marks
on the sprocket.
► If wear marks are deeper than a = 0.5 mm: Do
not use your chain saw and contact your
STIHL servicing dealer.
The chain sprocket must be replaced.
10.2 Checking the Guide Bar
► Switch off the chain saw, engage the chain
brake and remove the battery.
► Remove the chain and guide bar.
English 9 Switching the Saw On/Off
38 0458-791-9621-C