Operation Manual

MSA 160 T
English
68
NOTICE
Always slacken off the chain again after
finishing work. The chain contracts as it
cools down. If it is not slackened off, it
can damage the drive shaft and
bearings.
Long-term storage
See "Storing the machine"
N Release the trigger switch
lockout (1) and trigger switch (2) so
that they return to their initial
position – in the original position, the
trigger switch (2) is once again
blocked by the trigger switch
lockout (1)
The coasting brake stops the saw chain.
N Secure the chain saw so that it
cannot be accidentally switched on
again – press the hand guard
forward towards the tip of the bar
(position ƒ)
During breaks and after work, remove
the battery from the machine and fit the
chain scabbard.
Removing the battery
N Press both trigger interlocks (3)
simultaneously – battery (4) is
unlocked
N Remove battery (4) from the
housing
When the machine is not in use, shut it
off so that it does not endanger others.
Secure it against unauthorized use.
Switching Off
2
1
9923BA021 KN
9923BA018 KN
4
9923BA022 KN
3