Operation Manual

MSA 160 T
English
57
Chain Scabbard
Your saw comes standard with a chain
scabbard that matches the cutting
attachment.
If guide bars of different lengths are
mounted to the saw, always use a chain
scabbard of the correct length which
covers the complete guide bar.
The length of the matching guide bars is
marked on the side of the chain
scabbard.
N Remove the battery from the
machine
Removing the chain sprocket cover
N Unscrew nut (1) and remove chain
sprocket cover (2)
N Turn screw (1) to the left until the
tensioner slide (2) butts against the
left end of the housing slot
Fitting the saw chain
WARNING
Put on protective gloves – risk of injury
by the sharp cutters.
N Fit the chain starting at the nose of
the guide bar
001BA244 KN
Mounting the Bar and Chain
9923BA007 KN
2
9923BA008 KN
1
390BA003 KN