Instruction Manual

MSA 160 C, MSA 200 C
English
49
Battery
The machine may be operated only with
original STIHL AP and AR rechargeable
batteries.
Power tool running time is dependent on
the stored energy of the battery.
STIHL AP series and AR series
rechargeable batteries may be charged
only with original STIHL AL series
chargers.
STIHL AP series and AR series
rechargeable batteries may be charged
only with original STIHL AL series
chargers.
Charger
Chain Lubrication
Fully automatic speed-controlled oil
pump with reciprocating piston
Weight
Cutting Attachments
Recommended cutting attachments
conforming with the 45 degree
computed kickback angle requirement
of Section 19.108 of UL 60745-2-13
when used on this model chain saw (see
the chapter on "Safety Precautions and
Working Techniques"):
Rollomatic E Mini guide bars
Actual cutting length will be less than
listed bar length.
Saw chain 1/4" P
Chain sprocket
To comply with the 45 degree computed
kickback angle requirement of Section
19.108 of UL 60745-2-13 (and Section
5.11 of ANSI/OPEI B175.1-2012), use
replacement saw chains listed above or
elsewhere by STIHL as conforming with
those requirements when used on this
model chain saw or use saw chains
Specifications
Type: Lithium-ion
Designation: AP, AR
Rated capacity in Ah
1)
:
1
Rated capacity calculated pursuant
to IEC 61960. Usable energy
available to the operator will be
less.
See rating
plate
Stored energy in Wh
2)
:
2
The battery is marked with its
stored energy as provided by the
cell manufacturer. Usable energy
available to the operator will be
less.
See rating
plate
AL 100
Power supply: 120 V / 60 Hz
Rated current: 1.3 A
Power consumption: 75 W
Charge current: 1.6 A
Insulation: II, E (double
insulated)
AL 300
Power supply: 120 V / 60 Hz
Rated current: 4.7 A
Power consumption: 330 W
Charge current: 6.5 A
Insulation: II, E (double
insulated)
AL 500
Power supply: 120 V / 60 Hz
Rated current: 4.8 A
Power consumption: 570 W
Charge current: 12 A
Insulation: II, E (double
insulated)
Oil tank capacity: 7.1 fl.oz (0.21 l)
with bar and chain, without battery
MSA 160 C: 6.0 lbs (2.7 kg)
MSA 200 C: 6.4 lbs (2.9 kg)
Reduced kickback STIHL guide bars
(with green label)
Bar lengths: 25, 30, 35 cm (10, 12,
14 in.)
Pitch: 1/4" P (6.35 mm)
Groove width: 1.1 mm (0.043 in)
Sprocket nose: 8-tooth
Low kickback STIHL saw chain (with
green label)
Picco Micro 3 (71 PM3) Type 3670
Pitch: 1/4" P (6.35 mm)
Drive link gauge: 1.1 mm (0.043 in)
MSA 160 C: 6-tooth for 1/4" P
MSA 200 C: 7-tooth for 1/4" P