Instruction Manual

ManualsBrandsSTIHL ManualsBattery SawsInnovative and surprisingly powerful STIHL Lithium-Ion battery-powered chainsaw.

MSA 160 C, MSA 200 C

English

28

N Remove screw (2)

N Position tensioning gear (1) and

guide bar (3) relative to one another

N Insert and tighten screw (2)

Releasing the chain brake

N Pull hand guard towards the front

handle until it engages audibly and

the hand guard is in the position ‚

– chain brake is released

Fitting the saw chain

WARNING

Put on protective gloves – risk of injury

by the sharp cutters

N Fit the saw chain – starting at the

nose of the guide bar – pay attention

to the position of the tensioning gear

and the cutting edges

N Turn tensioning gear (1) to the right

as far as possible

N Turn the guide bar so that the

tensioning gear faces the user

N Place the saw chain on the chain

sprocket (2)

N Slide the guide bar over the collar

screw (3); the head of the rear collar

screw must protrude into the oblong

hole

N Guide the drive link into the bar

groove (arrow) and turn the

tensioning gear to the left as far as

possible

2310BA015 KN

2

1

3

2310BA016 KN

2

2310BA017 KN

3999BA010 KN

1

181BA012 KN

2

3

181BA013 KN

3999BA004 KN