Instruction Manual

MSA 160 C, MSA 200 C
English
25
e) Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools
with sharp cutting edges are less
likely to bind and are easier to
control.
g) Use the power tool, accessories
and tool bits etc. in accordance with
these instructions, taking into
account the working conditions and
the work to be performed. Use of the
power tool for operations different
from those intended could result in a
hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type
of battery pack may create a risk of
fire when used with another battery
pack.
b) Use power tools only with
specifically designated battery
packs. Use of any other battery
packs may create a risk of injury and
fire.
c) When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a
connection from one terminal to
another. Shorting the battery
terminals together may cause burns
or a fire.
d) Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from
the battery may cause irritation or
burns.
6) Service
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This
will ensure that the safety of the
power tool is maintained.
Chain saw safety warnings
– Keep all parts of the body away
from the saw chain when the chain
saw is operating. Before you start
the chain saw, make sure the saw
chain is not contacting anything. A
moment of inattention while
operating chain saws may cause
entanglement of your clothing or
body with the saw chain.
– Always hold the chain saw with your
right hand on the rear handle and
your left hand on the front handle.
Holding the chain saw with a
reversed hand configuration
increases the risk of personal injury
and should never be done.
– Hold the power tool by insulated
gripping surfaces only, because the
saw chain may contact hidden
wiring. Saw chains contacting a
"live" wire may make exposed metal
parts of the power tool "live" and
could give the operator an electric
shock.
– Wear safety glasses and hearing
protection. Further protective
equipment for head, hands, legs
and feet is recommended.
Adequate protective clothing will
reduce personal injury by flying
debris or accidental contact with the
saw chain.
– Do not operate a chain saw in a
tree. Operation of a chain saw while
up in a tree may result in personal
injury.