Instruction Manual

MSA 160 C, MSA 200 C
English
23
WARNING
In order for the chain brake on your
STIHL chain saw to properly perform its
function of reducing the risk of kickback
and other injuries, it must be properly
maintained. Like an automobile brake, a
chain saw chain brake incurs wear each
time it is engaged.
The amount of wear will vary depending
upon usage, conditions under which the
saw is used and other factors. Excessive
wear will reduce the effectiveness of the
chain brake and can render it
inoperable.
For the proper and effective operation of
the chain brake, the brake band and
chain sprocket drum must be kept free of
dirt, grease and other foreign matter
which may reduce friction of the band on
the drum.
For these reasons, each STIHL chain
saw should be returned to trained
personnel such as your STIHL servicing
dealer for periodic inspection and
servicing of the brake system according
to the following schedule:
Heavy usage – every three months,
Moderate usage – twice a year,
Occasional usage – annually.
The chain saw should also be returned
immediately for maintenance whenever
the brake system cannot be thoroughly
cleaned or there is a change in its
operating characteristics.
Regularly check the electrical contacts
and ensure that the insulation of the
power cord and plug of the charger is in
good condition and shows no sign of
aging (brittleness).
Electrical components, e.g. power cord
of charger, may only be repaired or
replaced by a qualified electrician.
Keep the battery guides free from
foreign matter – clean as necessary.
Do not spray the machine with water.
Do not clean your machine with a
pressure washer. The solid jet of water
may damage parts of the machine.
Clean plastic components with a cloth.
Do not use aggressive detergents. They
may damage the plastic.
Store chain saw in a dry, locked location
with the front hand guard on ƒ, the
battery removed and out of reach of
children (see chapter "Storing the
Machine" in the instruction manual).
This chapter relays the prescribed
wording of general safety advice for
handheld motor-operated electric chain
saws contained in UL 60745-1 and
UL 60745-2-13.
The safety precautions and warnings on
avoiding an electric shock given under
"2) Electrical safety" do not apply to
STIHL cordless electric power tools.
WARNING
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite
accidents.
b) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose
control.
General Power Tool Safety
Warnings