Operation Manual

0458-727-9621-A
69
English 9 Removing and Fitting the Battery
► Pull the hand guard toward the handlebar with your left
hand.
The hand guard engages with an audible click. The chain
brake is disengaged.
9.1 Fitting the Battery
► Engage the chain brake.
► Insert the battery (1) in the battery compartment (2) and
press it home until you hear a click.
Arrows (3) on battery (1) are still visible and battery (1) is
held securely in battery compartment (2). There is no
electrical contact between the saw and battery (1).
► Push the battery (1) into the battery compartment (2) as
far as stop.
The battery (1) engages with a second click and is flush
with the saw’s housing.
9.2 Removing the battery
► Stand the saw on a level surface.
► Press the locking lever (1).
The battery (2) is unlocked and can be removed.
10.1 Switching On the Chain Saw
► Hold the chain saw by the control handle with your right
hand, wrapping your thumb around the control handle.
► Release chain brake.
► Hold the chain saw by the handlebar with your left hand,
wrapping your thumb around the handlebar.
► Press and hold the lockout button (1) with your thumb.
► Squeeze and hold the trigger (2) with your index finger.
The chain saw accelerates and the chain starts moving.
9 Removing and Fitting the Battery
0000-GXX-1208-A0
1
2
3
10 Switching the Saw On/Off
0000-GXX-1209-A0
1
2
2
0000-GXX-1212-A0
1