Instruction Manual

EN 55014‑1, EN 55014‑2, EN 60745‑1 and
EN 60745‑2‑13.
The EC type examination test was carried out
pursuant to Directive 2006/42/EC, Art. 12.3(b) at:
VDE Prüf- u. Zertifizierungsinstitut (NB 0366),
Merianstraße 28, 63069 Offenbach, Germany
Certification number
–
MSA 120 C: 40043471
–
MSA 140 C: 40045658
The measured and guaranteed equivalent sound
power level has been determined in accordance
with Directive 2000/14/EC, Annex V.
MSA 120 C
–
Measured sound power level: 95 dB(A)
–
Guaranteed sound power level: 97 dB(A)
MSA 140 C
–
Measured sound power level: 96 dB(A)
–
Guaranteed sound power level: 98 dB(A)
The technical documents are stored at
ANDREAS STIHL AG & Co. KG Produktzulas‐
sung.
The year of manufacture, country of manufacture
and serial number are applied to the chainsaw.
Done at Waiblingen, 03.02.2020
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann, Head of Product Data,
Regulations and Licensing
24.2 STIHL AL 101 Charger Con‐
formity Notice
This charger has been manufactured and put on
the market in accordance with the following
directives: 2014/35/EU, 2014/30/EU and
2011/65/EU.
The year of manufacture, country of manufacture
and serial number are applied to the blower.
The complete EC Declaration of Conformity is
available from ANDREAS STIHL AG & Co. KG,
Badstrasse 115, 71336 Waiblingen, Germany.
25 General Power Tool Safety
Warnings
25.1 Introduction
This chapter reproduces the pre-formulated, gen‐
eral safety precautions specified in the
IEC 62841 standard for hand-held motor-oper‐
ated electric tools.
STIHL is obliged to publish these texts.
The safety precautions and warnings on avoiding
an electric shock given under “Electrical Safety”
do not apply to STIHL cordless products.
WARNING
■ Read all the safety precautions, instructions,
illustrations and specifications accompanying
this electric power tool. Failure to follow the
safety warnings and instructions may result in
electric shock, fire and/or serious injury. Save
all safety warnings and instructions for future
reference.
The term "electric power tool" in the safety warn‐
ings refers to mains-operated (corded) power
tools or battery-operated (cordless) power tools.
25.2 Work area safety
a
)
Keep your work area clean and well lit. Clut‐
tered or dark areas invite accidents.
b)
Do not work with the electric power tool in
potentially explosive environments in which
there are inflammable liquids, gases or dusts.
Electric power tools create sparks, which can
ignite dusts or fumes.
c)
Keep children and other people away while
you are operating the electric power tool. Dis‐
tractions can cause you to lose control of the
electric power tool.
25.3 Electrical safety
a
)
Electric power tool plugs must match the out‐
let. The plug must not be modified in any way.
Do not use any adapter plugs with earthed
(grounded) electric power tools. Unmodified
plugs and matching outlets will reduce risk of
electric shock.
b)
Avoid touching earthed surfaces such as
pipes, radiators, ovens and refrigerators with
any part of your body. There is an increased
risk of electric shock if your body is earthed or
grounded.
English 25 General Power Tool Safety Warnings
62 0458-716-9621-D