Instruction Manual

0458-716-9621-B
82
English 20 Specifications
20.1 STIHL MSA 120 C chain saw
– Approved battery: STIHL AK
– Weight without battery, guide bar and saw chain 2.1 kg
– Max. oil tank capacity: 110 cc (0.11 l)
20.2 Chain Sprockets and Chain Speeds
The following chain sprockets may be used and produce the
maximum chain speed quoted below:
– 7-tooth for 1/4" P: 13.3 m/s
20.3 Minimum groove depth of guide bars
The mininum groove depth depends on the pitch of the guide
bar.
–1/4"P 4mm
20.4 STIHL AK Battery
– Battery technology: Lithium-ion
– Voltage: 36 V
– Capacity in Ah: see rating label
– Energy content in Wh: see rating label
– Weight in kg: see rating label
– Permissible temperature range for operation and storage:
-10°C to +50°C
20.5 Charger STIHL AL 101
– Rated voltage: see rating plate
– Frequency: see rating plate
– Rated power: see rating plate
– Charging current: see rating plate
– Permissible temperature range for use and storage:
+5°C to +40°C
The charging times are indicated at www.stihl.com/
charging-times.
20.6 Noise and Vibration Data
STIHL recommends that you wear hearing protection.
– Sound pressure level L
p
measured according to
EN 60745-2-13: 83 dB(A) K-value for noise pressure level
is 2 dB(A).
– Sound power level L
w
measured according to EN 60745-
2-13: 94 dB(A) K-value for sound power level is 2 dB(A).
– Vibration level a
hv
measured according to EN 60745-2-13
– Control handle: < 3.2 m/s². K-value for vibration level is
2m/s².
– Front handle: < 3.4 m/s². K-value for vibration level is
2m/s².
The vibration values quoted above have been measured
according to a standardized test procedure and may be used
to compare electric power tools. Depending on the type of
usage, the vibrations that actually occur may differ from the
values quoted. The vibration values quoted may be used for
an initial assessment of the user's exposure to vibrations.
The actual exposure to vibrations has to be estimated. This
process may also take into account times during which the
electric power tool is switched off and times during which it
is switched on but running off load.
20.7 REACH
REACH is an EC regulation and stands for the Registration,
Evaluation, Authorisation and Restriction of Chemical
substances.
For information on compliance with the REACH regulation
see www.stihl.com/reach.
20 Specifications