Instruction Manual

0458-716-9621-B
67
English 8 Engaging and Disengaging the Chain Brake
8.1 Engaging the Chain Brake
The saw is equipped with a chain brake.
The chain brake is activated by the inertia of the front hand
guard if the kickback force is high enough or can be engaged
by the operator.
► Push the hand guard away from the handlebar with your
left hand.
The hand guard engages with an audible click. The chain
brake is engaged.
8.2 Disengaging the Chain Brake
► Pull the hand guard toward the handlebar with your left
hand.
The hand guard engages with an audible click. The chain
brake is disengaged.
9.1 Fitting the Battery
► Engage the chain brake.
► Insert the battery (1) in the battery compartment (2) and
press it home until you hear a click.
Arrows (3) on battery (1) are still visible and battery (1) is
held securely in battery compartment (2). There is no
electrical contact between the saw and battery (1).
► Push the battery (1) into the battery compartment (2) as
far as stop.
The battery (1) engages with a second click and is flush
with the saw’s housing.
9.2 Removing the battery
► Stand the saw on a level surface.
8 Engaging and Disengaging the Chain
Brake
0000-GXX-1210-A0
0000-GXX-1211-A0
9 Removing and Fitting the Battery
0000-GXX-1208-A0
1
2
3