Instruction Manual

0458-716-9621-B
64
English 7 Assembling the Saw
► Remove the battery (2).
6.2 State of Charge
► Press the button (1).
The LEDs (5) glow green for about 5 seconds and indicate
the state of charge.
► If the LED on the right flashes green: Charge the battery.
6.3 LEDs on Battery
The LEDs can show the state of charge or malfunctions. The
LEDs can glow or flash green or red.
The state of charge is indicated when the LEDs glow or flash
green.
► If the LEDs glow or flash red: Troubleshooting, @ 19.
Malfunction in chainsaw or battery.
6.4 LED on Charger
The LED indicates the operating status of the charger.
If the LED glows green, the battery is being charged.
► If the LED flashes red: Rectify the malfunction.
Malfunction in charger.
7.1 Mounting and Removing the Bar and Chain
7.1.1 Mounting the Bar and Chain
The bar and chain combinations that can be used with the
chain sprocket are listed in the specifications, @ 21.
► Switch off the chain saw, engage the chain brake and
remove the battery.
► Raise the grip (1) of the wingnut (2).
► Rotate the wingnut (2) counterclockwise until the chain
sprocket cover (3) can be removed.
► Remove the chain sprocket cover (3).
► Remove the tensioning gear (4).
► Take out the screw (5).
1
0000-GXX-0629-A0
20-40%
40-60%
60-80%
80-100%
0-20%
7 Assembling the Saw
0000-GXX-1199-A0
1
3
2
4
4
5
0000-GXX-1200-A0
5
6