Operation Manual

58
English / USA
MS 880
EPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours,
Intermediate = 125 hours,
Moderate = 50 hours
Engine
Ignition System
Type: Electronic magneto ignition
Spark plug (suppressed):
Bosch WSR 6 F or NGK BPMR 7 A
Electrode gap
0.02 in (0,5 mm)
Carburetor
All position diaphragm carburetor with
integral fuel pump
Fuel tank capacity
2.75 US pt (1.3 l)
Chain lubrication
Fully automatic, speed-controlled
reciprocating oil pump. Additional
manual oil flow control
Oil tank capacity
1.5 US pt (0,7 l)
Weight
(without bar and chain)
21.8 lb (9,9 kg)
Cutting Attachment
Recommended cutting attachments
for compliance with § 5.11 of ANSI
Standard B 175.1-2000
(see page 14 of this Manual):
STIHL reduced kickback bar
(with green label) for 3/8" pitch:
Rollomatic "S" with sprocket nose
43 or 53 cm (17 or 21 in)
STIHL low kickback chain
1)
(with green label) for 3/8" pitch:
3/8" (9,32 mm) Rapid Micro 2 (36 RM2)
3/8" (9,32 mm) Rapid Super C3
(33 RSC3, 36 RSC3)
Chain sprocket:
8-tooth for 3/8" pitch spur sprocket
1)
See definition of "low kickback
chain" on page 17.
STIHL single cylinder two-stroke engine
Displacement: 7.42 cu.in
(121.6 cm
3
)
Bore: 2.36 in (60 mm)
Stroke: 1.69 in (43 mm)
Idle speed: 2,700 rpm
Specifications