Operation Manual

66
English / USA
Rescue Saw
Engine
EPA / CEPA:
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category:
A = 300 hours,
B = 125 hours,
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours,
Intermediate = 125 hours,
Moderate = 50 hours
Ignition System
Fuel/Oil System
Weight
Cutting Attachments
Rescue Operations
For rescue operations, use only chain
specifically authorized by STIHL for
such use, i.e. Rapid Duro Rescue
(36 RDR).
STIHL recommends the following bar for
use with the above specified chain in
rescue operations:
Rollomatic "S" with sprocket nose
20 in (50 cm)
Normal Woodcutting
Recommended cutting attachments
for compliance with § 5.11 of ANSI
Standard B 175.1-2000 for normal
woodcutting
(see page 17 of this Manual):
STIHL reduced kickback bar
(with green label) for 3/8" pitch:
Rollomatic with sprocket nose
16, 18 or 20 in (40, 45 or 50 cm)
STIHL low kickback chain
1)
(with green label) for 3/8" pitch:
3/8" (9.32 mm) Rapid-Micro 2
(33 RM 2, 36 RM 2)
3/8" (9.32 mm) Rapid-Super 3
(33 RSC 3, 36 RSC 3
Chain sprocket:
7-tooth for 3/8" pitch spur sprocket
STIHL single cylinder two-stroke
engine
Displacement: 4.67 cu.in
(76,5 cm
3
)
Bore: 2.05 in
(52 mm)
Stroke: 1.42 in
(36 mm)
Idle speed: 2,500 rpm
(2.500 1/min)
Specifications
Type: Electronic
magneto ignition
Spark plug
(suppressed):
Bosch WSR 6 F,
NGK BPMR 7 A
Electrode gap: 0.02 in (0.5 mm)
Carburetor:
Fuel tank capacity:
Fuel mix:
Air filter:
Chain lubrication:
Oil tank capacity:
All position
diaphragm
carburetor with
integral fuel pump
1.69 US pt (0,8 l)
See “Fuel”
Filter insert
(wire mesh)
Fully automatic oil
pump
0.68 US pt (0.325 l)
without bar and
chain:
Depth limiter
(Special
Accessory):
15.4 lb (7.0 kg)
2.56 lb (1.16 kg)