Operation Manual

65Rescue Saw
English / USA
20. Master Control Lever.
Lever for choke control, starting
throttle, run and stop switch
positions.
21. Throttle Trigger.
Controls the speed of the engine.
22. Throttle Trigger Interlock.
Must be depressed before the
throttle trigger can be activated.
23. Rear Handle.
The support handle for the right
hand, located at or toward the rear
of the saw.
24. Rear Hand Guard.
Gives added protection to
operator's right hand.
25. Depth Limiter
For adjusting the cutting depth of
the cutting attachment to limit the
depth of entry into material.
26. Star Knob
Locks Depth Limiter in selected
position.
Guide Bar Nose.
The exposed end of the guide bar.
(Not illustrated, see chapter
“Tensioning the Saw Chain”.)
Clutch.
Couples engine to chain sprocket
when engine is accelerated beyond
idle speed. (Not illustrated.)
Anti-Vibration System.
The anti-vibration system includes a
number of buffers designed to
reduce the transmission of
vibrations created by the engine
and cutting attachment to the
operator's hands. (Not illustrated.)