Operation Manual

62
English / USA
Rescue Saw
1) STIHL recommends that this work be done by a
STIHL servicing dealer
2)Firmly tighten cylinder base screws of
professional saws (3.4 kW or more) after 10 to 20
hours of operation
*see “Guide to Using this Manual“
Please note that the following maintenance intervals apply for normal
operating conditions only. If your daily working time is longer than normal or
cutting conditions are difficult (fire and rescue operations, very dusty work
area, resin-rich wood, tropical wood etc.), shorten the specified intervals
accordingly. If you only use the saw occasionally, extend the intervals
accordingly.
before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged as required
Carburetor
Check idle adjustment – chain must not rotate
XX
Readjust idle
X
Spark plug
Readjust electrode gap
X
Replace after about 100 operating hours
All accessible screws and nuts
(not adjusting screws)
2)
Retighten
X
Spark arresting screen* in muffler
Inspect
X
Clean or replace
X
Chain catcher
Check
X
Replace
X
Safety labels Replace
X