Operation Manual

61Rescue Saw
English / USA
1) STIHL recommends that this work be done by a
STIHL servicing dealer
2) see "Chain brake"
Maintenance Chart
Please note that the following maintenance intervals apply for normal
operating conditions only. If your daily working time is longer than normal or
cutting conditions are difficult (fire and rescue operations, very dusty work
area, resin-rich wood, tropical wood etc.), shorten the specified intervals
accordingly. If you only use the saw occasionally, extend the intervals
accordingly.
before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged as required
Complete machine
Visual inspection (condition, leaks)
XX
Clean
X
Throttle trigger, trigger interlock, Master
Control
Check operation XX
Chain brake
Check operation
XX
Check
1)2)
X
Pickup body/filter in fuel tank
Check
X
Clean, replace filter element
XX
Replace pickup body
XXX
Fuel tank Clean
X
Chain oil tank Clean
X
Chain lubrication Check
X
Saw chain
Inspect, also check sharpness
XX
Check chain tension
XX
Sharpen
X
Guide bar
Check (wear, damage)
X
Clean and turn over
X
Deburr
X
Replace
XX
Chain sprocket Check
X
Air filter
Clean
XX
Replace
X
Anti-vibration elements Have replaced by servicing dealer
1)
X
Cooling inlets Clean
X
Cylinder fins Clean
XX