Operation Manual

30
English / USA
Rescue Saw
Fit the spacer washers (4), cover* (5) and
spiked bumper (5) on the screws and
secure with the locknuts (6).
* See “Guide to Using this Manual“
Mounting the Depth Limiter
: Mount the guide bar and the saw
chain - see saw's instruction
manual.
: Slip the depth limiter guide (1) over
the special guide bar
: and insert the screws (2).
: Push the sliding sleeve (3) over the
guide.
: Fit the star knob (4) and washer (5).
: Tighten the screws (2).
: Pull the sliding sleeve (3) forward as
far as stop.
: Tighten down the star knob (4)
firmly.