Operators Manual
Table Of Contents
- Contents
- 1. Introduction
- 2. Safety Precautions
- 3. Specifications
- 4. Troubleshooting
- 5. Cutting Attachment
- 6. Clutch
- 7. Chain Brake
- 8. Engine
- 9. Ignition System
- 10. Rewind Starter
- 11. Servicing the AV System
- 12. Master Control Lever
- 13. Chain Lubrication
- 14. Fuel System
- 15. Special Servicing Tools
- 16. Servicing Aids
63MS 171, MS 181, MS 211
: Position the handle frame (1) so
that the lug (arrow) lines up with
the seat.
– Fit the anti-vibration springs on
the cylinder and engine housing.
: Insert and firmly tighten down the
screws (arrows) of the anti-
vibration springs on the oil tank
and cylinder.
533RA245 TG
1
533RA232 TG
: Fit screw (arrow) and tighten it
down firmly.
– Check that handle frame is
properly seated.
– Reassemble all other parts in the
reverse sequence.
– Tightening torques, b 3.5
533RA233 TG