Operators Manual
Table Of Contents
- Contents
- 1. Introduction
- 2. Safety Precautions
- 3. Specifications
- 4. Troubleshooting
- 5. Cutting Attachment
- 6. Clutch
- 7. Chain Brake
- 8. Engine
- 9. Ignition System
- 10. Rewind Starter
- 11. Servicing the AV System
- 12. Master Control Lever
- 13. Chain Lubrication
- 14. Fuel System
- 15. Special Servicing Tools
- 16. Servicing Aids
51MS 171, MS 181, MS 211
Machine runs trouble-free,
no further action necessary
no
Install new
ignition module,
b 9.1.1
yes
no
–Look for fault in fuel system
or carburetor
– Check engine for leaks
– Check position of flywheel on
crankshaft,
b 8.2, b 9.5
yes
Check operation
of switch shaft:
– Short circuit wire chafed?
– Does contact spring make contact
with short circuit wire in position “#“?
– If necessary, install new
wiring harness,
b 9.6.2
2
3
Powerful
spark?
Engine
runs