Instruction Manual

ManualsBrandsSTIHL ManualsChainsawsThe world's most powerful series-production chainsaw

Table Of Contents

STIHL MS 881
1 Introduction
2 Guide to Using this Manual
- 2.1 Symbols used with warnings in the text
- 2.2 Symbols in Text
3 Overview
- 3.1 Chainsaw
- 3.2 Symbols
4 Safety Precautions
- 4.1 Warning Signs
- 4.2 Intended Use
- 4.3 The Operator
- 4.4 Clothing and Equipment
- 4.5 Work Area and Surroundings
- 4.6 Safe Condition
- 4.7 Fuel Mixture and Refueling
- 4.8 Working
- 4.9 Reactive Forces
- 4.10 Transporting
- 4.11 Storing
- 4.12 Cleaning, Maintenance and Repair
5 Preparing the Saw for Operation
- 5.1 Preparing the Saw for Operation
6 Assembling the Saw
- 6.1 Mounting and Removing the Bar and Chain
- 6.2 Tensioning the Saw Chain
- 6.3 Filling Up with Chain Oil
7 Engaging and Disengaging the Chain Brake
- 7.1 Engaging the Chain Brake
- 7.2 Disengaging the Chain Brake
8 Mixing Fuel and Refueling the Chainsaw
- 8.1 Mixing Fuel
- 8.2 Fueling the Saw
9 Starting and Stopping the Engine
- 9.1 Selecting the Correct Starting Procedure
- 9.2 Preparing the engine for start
- 9.3 Starting the engine
- 9.4 Stopping the Engine
10 Checking the Saw
- 10.1 Checking the Chain Sprocket
- 10.2 Checking the Guide Bar
- 10.3 Checking the Saw Chain
- 10.4 Testing the Chain Brake
- 10.5 Checking the Controls
- 10.6 Checking Chain Lubrication
11 Operating the Saw
- 11.1 Setting to winter mode
- 11.2 Setting to summer mode
- 11.3 Adjusting Carburetor for Operation at High Altitude
- 11.4 Adjusting Carburetor for Cutting at Temperatures Below –10°C
- 11.5 Adjusting Oil Feed Rate
- 11.6 Holding and Controlling the Chainsaw
- 11.7 Sawing
- 11.8 Limbing
- 11.9 Felling
12 After Finishing Work
- 12.1 After Finishing Work
13 Transporting
- 13.1 Transporting the Chainsaw
14 Storing
- 14.1 Storing the Chainsaw
15 Cleaning
- 15.1 Cleaning the chainsaw
- 15.2 Cleaning the Bar and Chain
- 15.3 Cleaning the Air Filter
- 15.4 Cleaning the Spark Plug
16 Maintenance
- 16.1 Maintenance Intervals
- 16.2 Deburring the Guide Bar
- 16.3 Sharpening the Saw Chain
17 Repairing
- 17.1 Repairing the Chain Saw, Guide Bar and Saw Chain
18 Troubleshooting
- 18.1 Troubleshooting Chainsaw
- 18.2 Adjust to standard setting
- 18.3 Adjusting Idle Speed
- 18.4 Clearing the Combustion Chamber
19 Specifications
- 19.1 STIHL MS 881 Chainsaw
- 19.2 Chain Sprockets and Chain Speeds
- 19.3 Minimum Groove Depth of Guide Bars
- 19.4 Sound Values and Vibration Values
- 19.5 REACH
- 19.6 Exhaust Emissions
20 Bar and Chain Combinations
- 20.1 STIHL MS 881 Chainsaw
21 Spare Parts and Accessories
- 21.1 Spare parts and accessories
22 Disposal
- 22.1 Disposing of Chainsaw
23 EC Declaration of Conformity
- 23.1 STIHL MS 881 Chainsaw

23 EC Declaration of Conformity English

0458-890-8321-B. VA0.A21. 31